Craftsman 917.25693 owner manual Operation, HOW to USE Your Tractor, To Move Forward and Backward

Page 12

OPERATION

The operation of any tractor can result in foreign objects thrown into the eyes, which can result

in severe eye damage, Always wear safety glasses or eye shields before starting your tractor and while moving. We recommend wide vision safety mask for over the spectacles or standard

safety glasses.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE (See Fig. 10)

oDepress clutch/brake pedal into full "BRAKE" position and hold

Place parking brake tever in "ENGAGED" position and release pressure from clutch/brake pedal Pedal should remain in "BRAKE" pos tion. Make sure park'ngbrake wilt hold tractor secure_

PARKING BRAKE"ENGAGED"

MOWER

CLUTCH

LEVER

"ENGAGED"

 

"DISENGAGED"

CLUTCHIBRAKE

"DISENGAGED"

PEDAL "BRAKE"

POSITION

 

FIG. 10

STOPPRNG (See Figs, 10 & 11)

MOWER BLADES-

=Move mower cfutch tever to "DISENGAGED" position.

GROUND DRIVE -

° Depress ctutchtbrake pedal intofull "BRAKE" position,

• Move gearshift lever to "NEUTRAL" position,

ENGINE -

°Move throttle control to "SLOW" position,.

NOTE: Failure to move throttle control to "SLOW" position and allowing engine to idle before stopping may cause engine to "backfire",.

oTurn ignition key to "OFF" position and remove key.

Always remove key when leaving tractor to prevent unauthorized use.

o Never use choke to stop engine,

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass, To eliminate this possibility, always stop engine when stopping tractor on grass areas.

pletely, as described above, before leav- ing the operator's position, to empty

................ grass catcher, etc.

CLUTCH/

THROTTLE/

BRAKE

CHOKE

PEDAL

CONTROL

 

GEARSHIFT

 

LEVER

PARKING

 

BRAKE

 

 

IGNITION

 

SWITCH

FIG. 11

TO USE THROTTLE CONTROL (See FSg. 11)

Always operate engine at full throttle,.

=Operating engine at less than full throttle reduces the battery charging rate.

=Full throttle offers the best bagging and mower perfor- mance,

TO MOVE FORWARD AND BACKWARD

(See Figs. 10 & 11)

The direction and speed of movement is controlled by the gearshift lever.

oStart tractor with clutch/brake pedal depressed and gearshift lever in "NEUTRAL" position.

oMove gearshift lever to desired position.

o Slowly release clutch/brake pedal to start movement.

IMPORTANT: BRING TRACTOR TO A COMPLETE STOP BEFORE SHIFTING OR CHANGING GEARS. FAILURE TO DO SO WILL SHORTEN THE USEFUL LIFE OF YOUR TRANSAXLE

TO ADJUST MOWER CUTTRNG HEIGHT

(See Fig. 12)

The position of the mower lift lever determines the cutting height. The position of the mowerlift lever can be adjusted to desired position

oGrasp lift lever as shown, lift away from fender and move forward or'back to desired position.

The cutting height range is approximately 1-1/8" to 3-5/8'L The heights are measured from the ground to the blade tip with the engine not running These heights are approxi- mate and may vary depending upon soil conditions, height of grass and types of grass being mowed

12

Image 12
Contents Page Safety Rules Maintenance Agreement Muted TWO Year Warranty on Electric Start RRD NG EquupmentDAY Warranty on Battery Custo ER Responskb L T ESLE of Contents Engine ViAINTENANCEPERFORtVIANCE Contents of Hardware Pack Tools Required for Assembly To Remove Tractor CartonBefore Rolung Tractor OFF SKiD Unpack CartonHOW to SET UP Your Tractor Check Tire PressureCheck Deck Levelness BeltsInstall Battery See Figs INSTALL Mulcher Plate See Figs Assem LYConvert 30 Bagging Mulcher14NOWYOUR Lawn Tractor HOW to USE Your Tractor To Adjust Mower Cuttrng HeightOperation To Move Forward and BackwardTo Operate on Hdlls Before Starting HE EnghneTo Transport ADD GasouneMOWtNG Trps To Start Engbne See FigMulching Mowhng Tbps LubricationChart General RECOJkENDATONSLubrication CtART Before Each USECusto ER Espons Lines Brake OperationBlade Care Engine Transaxle Cooling=0.1 AiR Filter See FigCleaning Engune Coolhng FNS See FigMuffler AiR Screen See FigTo Install Mower See Figs To Remove Mower See FigsService and Adjustments To Level Mower HousbngTo Adjust Brake See Fig To Adjust Steerbng Wheel AlignentTo Replace Motion Drbve Belt See FigTo Start Engine WtfTH a Weak Battery See Fig To Remove Wheel for REPAnRSTo Replace Fuse Unterlocks and RelaysTo Adjust Throttle Control Cable To Adjust Carburetor See FigEngbne Battery StorageOther Engine OILCause Correction Engine notProblem Cause Correction Wfiouiileshoowing PoinwsPage 12.5 HP 38 Tractor .-MODEL Number 917=256930 PositionWneels & TgRES KEYPart Description KEY Part Descrption12.5 HP 38TRACTOR -= Model Number ElectricalKEY Part Description KEY Part NO. noDescriptuon 12.5 HP 38 Tractor ,.,,- Nodel Number Fender / ChassisKEY Part NO. no 12.5 HP 38 Tractor = = Model Number KEY Part DescriptionPart Descrptdon UNC12.5 HP 38 Tractor --MODEL Number DashRepaqrparts 116 Sector Gear 1 Axle SupportKEY Part Descrbption12.5 HP 38 Tractor = Model Number 9!7.256930 Front AxleDescrrption KEY Part Description Mower Lift Assembly 12.5 HP 38 Tractor - Model NumberBrake / Rear KEY PartRepair Parts 12.5 HP 38 Tractor -.. Model NumberJ14 Ground DriveHardware Shown Larger for Easier IDENTIFICAT!ON Model Number Descriptbon123 DescriptoonEpaif PTS Mower Deck12.5 HP 38 Tractor ,- Model NUI Ibeir Mower Deck125 HP 38 Tractor = Model Number Dana Transaxle = Model NUBER4360=502733 NOo Special Tools Required to Install 12.5 HP 38 Tractor ..- Model NumberRepair Parts Carburetor Overhaul KIT668 KEY NumberManufacturer 12.5 HP 38 Tractor - Model Number 917,256930 KEY Part NO. noRepair Parts Service Notes Page Cau,ohen.chan,reot!on.ono,oe Speed Transaxle Lawn Tractor Part Number Part Description

917.25693 specifications

The Craftsman 917.25693 is a robust and versatile lawn tractor designed for homeowners who seek efficiency and performance in maintaining their lawns. With its powerful engine and durable construction, this tractor stands out as an excellent choice for both residential and semi-professional use.

One of its prominent features is the 26 HP Kohler engine, which provides ample power to handle various mowing tasks with ease. The engine's design ensures smooth operation, allowing for efficient fuel consumption while delivering impressive torque. This reliable power source is complemented by a hydrostatic transmission, which allows for seamless speed adjustments without the need for manual gear shifting. This feature enhances user comfort and efficiency, particularly when navigating tight spaces or uneven terrain.

The cutting deck of the Craftsman 917.25693 is another notable characteristic. It boasts a 54-inch wide, fabricated cutting deck made from heavy-duty materials that provide durability and longevity. The deck is designed for superior airflow, resulting in an even and clean cut of grass. Additionally, the adjustable cutting height feature offers versatility, allowing users to choose from various height settings to achieve the desired lawn appearance.

This lawn tractor also includes an ergonomic design with a comfortable high back seat, ensuring that users can operate the machine for extended periods without discomfort. The easy-to-reach controls enhance maneuverability and control, making it user-friendly for individuals of all experience levels.

In terms of technology, the Craftsman 917.25693 comes equipped with a built-in LED headlight system, which improves visibility during early morning or late evening mowing sessions. The innovative design also features a fuel gauge that allows users to monitor fuel levels easily, preventing interruptions during mowing.

Maintenance is simplified thanks to the accessible engine bay and the inclusion of a deck wash port, which facilitates effortless cleaning of the cutting deck after use. This ensures optimal performance and extends the lifespan of the mower.

Overall, the Craftsman 917.25693 is a well-rounded lawn tractor that combines power, comfort, and advanced features, making it an ideal investment for anyone looking to maintain a beautiful lawn with minimal effort. Its durable construction and thoughtful design elements cater to the needs of homeowners, ensuring reliability and satisfaction with every use.