Asse#Bly, INSTALL Mulcher Plate, See Figs a

.................

ASSE#BLY

iNSTALL MULCHER PLATE

(See Figs. 6A & 68)

oInstall two latch hooks to mutcher plate using screw, washer, lock washer, and weld nut as shown.

NOTE: Pre-assembte weld nut to latch hook by inserting weld nut from the top with hook pointing down.

o Tighten hardware securety_

o Raise and hold deflector shield in upright position..

=Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

•Hook front latch into hole on front of mower deck

•Hook rear latch into hole on back of mower deck_

_ icAUTION: DO not remove discharge ..... i

guard from mower. Raise and hold i

_, guard when attaching mulcher plate R

!t and allow it to rest on plate while in

opera tion.

_____._j

i,,_..............................................................r

DEFLECTOR

SHIELD

HOOKS

FiG. 6B

TO CONVERT TO BAGGaNG OR

DISCHARGING

Simply remove mulcher plate and store in a safe place, Your mower is now ready for discharging or installation of optional grass catcher accessory

	HOOK POINTS
WELD NUT	DOWN

LOCK

WELD.

NUT _ WASHER

LATCH

HOOK

LOCK WELD

WASHER NUT

WASHER

MULCHER

PLATE

FiG. 6A

JCHECKLIST

BEFORE YOU OPERATE AND ENJOY YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SA TISFA CTION FROM THIS QUALITY PRODUCT

PLEASE REVIEW THE FOLLOWING CHECKLIST:

V" All assembly instructions have been complete&

v" No remaining loose parts in carton.

,/" Battery is properly prepared and charged° (Minimum 1 hour at 6 amps).

,/ Seat is adjusted comfortably and tightened securely

v" All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory)_

,/ Be sure mower deck is properly leveled side-to-side! front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

_," Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

•/ Check wiringo See that all connections are still secure and wires are propedy clamped.

WHILE LEARNING HOWTO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT

ITEMS:

,/ Engine oil is at proper level°

,/ Fuel tank is filled with fresh, clean, regular unleaded gasoline

,/ Become familiar with all controts - their location and function. Operate them before you start the engine.

,/ Be sure brake system is in safe operating condition.