operation
operation
Become familiar with all of the controls and adjustments on the Power Rake before operating. Controls for operating Power Rake are as follows:
SAFETY SWITCH - Must be pressed in before handle switch can be used to start engine.
HANDLE SWITCH - Pull and hold to start and keep engine running. When let go engine will stop and safety switch should
COLLECTION BAG - Holds material that has been thatched from the lawn. Empty bag regularly while detaching.
POWER CORD - Supplies electricity to the Power Rake, make sure to connect to a power supply only using outdoor rated extension cables.
CORD HOLDER - Holds extension cord to help keep it out of the way and take stress off of the handle switch cord.
extension cord ratings
(Use only outdoor rated extension cords plugged into a ground fault receptacle.)
gauge | length | |
16 Gauge | 0 | - 50 Feet |
14 Gauge | 51 | - 100 Feet |
| CORD | |
| HOLDER | |
| HANDLE | |
| SWITCH | |
SAFETY |
| |
SWITCH |
| |
CORD | EXTENSION | |
CORD | ||
HOLDER | ||
| ||
POWER |
| |
CORD |
| |
COLLECTION BAG |
|
FIGURE 9
maintenance |
| storage |
|
|
|
maintenance
CAUTION: before performing any maintenance, make sure the Power Rake is turned off and unplugged from any power source.
•Clear excess debris left in Power Rake housing after each use.
•Make sure nothing has wrapped around the tines/ tine shaft. Remove anything that has wrapped itself around the tines/tine shaft.
•Check and make sure all wing knobs and carriage bolts are tightened.
•Clean Power Rake and bag before storing. Do not clean with water, solvents or petroleum based products.
•Store in a dry place that is not exposed to the elements and out of the reach of children.
6 | Call |
| DO NOT RETURN TO STORE |