Craftsman 486.248473 INSTALL Tilt Bracket Assembly see on Next, Apply Grease HEX Bolt, Lock NUT N

Page 9

STEP7: iNSTALL TILT BRACKET ASSEMBLY (SEE FIGURE 6 ON NEXT PAGE)

*Loosen the bolts end nuts on the tilt bracket assembly 1/4 turn or until the two plates of the assembly will slide back and forth. You will retighten them later in step 25.

Lightly apply grease to the end of the arm on the tilt anchor assembly and install the tilt bracket assembly to the arm using a 1/2" x 1" hex bolt (C) and 1/2" hex lock nut (N). Tighten then loosen the nut 1/4 turn, or until the tilt bracket assembly pivots freely.

Install the 1/4" x 2" hex bolt (I) through a 1/4" washer (CC), the 1" long spacer (V) and then through the end of the extension spring on the tilt bracket assembly. Next, insert the end of the bolt into the hole in the arm of the tilt anchor assembly and install the slotted stop bracket (NN), a 1/4" washer (CC) and a 1/4" nylock nut (T) onto the bolt. Tighten.

1/4" NYLOCK NUT (T)

1/4" WASHER

SLOTTED

STOP

1/2" x 1"

 

 

 

HEX BOLT (C)

BRACKET

(NN) \

r

 

TILT ANCHOR

 

 

ASSEMBLY

 

 

1/4" WASHER (CC)

 

 

1" SPACER (V) /

APPLY

 

 

/

 

1/4" x 2"

GREASE

 

HEX BOLT (I)

1/2" HEX

 

TILT BRACKET

 

LOCK NUT (N)

ASSEMBLY

FIGURE 6

STEP 8: INSTALL DUMP PIVOT BRACKET

(SEE FIGURE 7)

*Install a 1/8" x 1-1/2" cotter pin (AA) to the inside hole in the shaft shown in figure 7, and then install a 1" washer (KK) onto the shaft. Apply grease to the end of the shaft and install the dump pivot bracket assembly onto the shaft. Install a 1" washer (KK) onto the shaft and secure it using a 1/8" x 1-1/2" cotter pin (AA).

1/8" x 1-1/2"

COTTER PiN (AA)

\

/-_'_1" WASHERS (KK)

1/8" x 1-1/2" COTTER PiN (AA)

APPLY

GREASE

DUMP PIVOT

BRACKET

FIGURE 7

STEP 9: iNSTALL DUMP CONTROL ROD (SEE FIGURE 8)

*Install a 1/8" x 1-1/4" cotter pin (Z) into the inside hole in each end of the dump control rod. Spread the ends of the cotter pins and wrap around the rod. Install a 5/8" washer (HH) onto each end of the control rod.

Install the dump control rod to the dump pivot bracket and bucket. Fasten using two 5/8" washers (HH) and 1/8" x 1-1/4" cotter pins (Z). Spread the ends of the cotter pins and wrap around the rod.

1/8" x 1-1/4" COTTER PiN (Z)

5/8" WASHERS (HH)

1/8" x 1-1/4"

COTTER PiN (Z)

x 1-1/4"

COTTER

PiNS (Z)

DUMP

CONTROL

5/8" WASHERS (HH) ROD

FIGURE 8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Do not Return to Store CRAFTSHAN+ONE Year Full Warranty Scoopattachment Wheel Weight Tire ChainsJjA Parts not Shown Full Size Parts BAG Contents\16 Remove Parts from Carton Tools Required for AssemblyAssemble Scoop See FigureCotter Y AssemblyLift Strap Bucket removed for clarityInstall Dump Pivot Bracket INSTALL Tilt Bracket Assembly see on NextApply Grease HEX Bolt Lock NUT NINSTALL LiFT Cable INSTALL LiFT Handle Tube see FigureAdjuster INSTALL Dump Handletube see FigureDump Pivot \5/16Lawn Tractors and Garden Tractors Install Front Scoop on TractorBrackets Install Frame Brace see FigureInylock NUT O Frame Brace Large Washer GGSuspension Brackets Long Mount Scooptotractor see FigureHairpin Cotter AttachmentAdjust LiFT Straps Adjust Slotted Stop Bracket see FigureCheck Dumping Operation Knowyour Front END Scoop HOW to USE Your ScoopCleaning Check for Loose FastenersCustomer RESPONSiBiLiTiES Problem Cause Correction 76/\ QTY Description QTYPage Only Ride UP and Down Hill Not Across Hill Degrees MAX Your Home

486.248473 specifications

The Craftsman 486.248473 is a versatile and robust utility tractor designed for homeowners and small farm operations. With its blend of power, efficiency, and user-friendly features, this tractor is a popular choice among gardening enthusiasts and those with larger properties to maintain.

One of the standout features of the Craftsman 486.248473 is its powerful engine. The tractor is equipped with a reliable Briggs & Stratton engine, providing ample horsepower for a variety of tasks, from mowing to tilling. This engine is designed for optimal performance, ensuring that users can tackle tough jobs with ease while maintaining fuel efficiency.

Another key characteristic is its cutting-edge lawn mowing technology. The Craftsman 486.248473 features a durable, heavy-duty mowing deck that boasts a wide cutting path. This allows for efficient mowing and ensures a clean cut every time. The deck is adjustable, offering multiple height settings to meet the varying needs of your lawn, whether you prefer a manicured look or a more natural look.

Comfort and convenience are also prioritized in the design of this tractor. The ergonomic seat is adjustable, providing a comfortable riding experience, especially during extended use. The easy-to-reach control panel allows operators to adjust settings and monitor performance without hassle, making it intuitive even for novice users.

The tractor's robust construction is another point of emphasis. Built with a reinforced frame and durable materials, the Craftsman 486.248473 is designed to withstand the rigors of regular use. This ensures longevity and reliability, making it a worthwhile investment for users seeking a workhorse in their gardening and landscaping repertoire.

Additionally, the Craftsman 486.248473 is compatible with various attachments. This versatility allows users to customize the tractor with plows, tillers, and other implements to meet specific needs throughout the year—from snow removal in winter to tilling soil in the spring.

In summary, the Craftsman 486.248473 is an outstanding utility tractor that combines power, efficiency, and user-friendly features. Its strong engine, advanced mowing technology, comfort-driven design, durability, and compatibility with attachments make it an essential tool for anyone looking to manage and maintain their property effectively. Whether for routine lawn care or more demanding landscaping tasks, this tractor stands out as a reliable solution for various outdoor projects.
Top Page Image Contents