Craftsman 917.38741 Engine, Lawn Mower To Adjust Cutting Height, To Adjust Handle, Position

Page 14

CAUTION: Before performing any service and adjustments:

•Release control bar and stop engine.

•Make sure the blade and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place where it cannot come in

contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See "TO ADJUST CUTTING HEIGHT" in

the Operation section of this manual.

DISCHARGE GUARD

The discharge guard, attached to the discharge opening of your lawn mower, is provided to prevent the possibility of injury resulting from objects being thrown out of the discharge opening into the operator mowing position. If the discharge guard becomes damaged, it should be replaced.

REAR DEFLECTOR

The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator mowing position. If the deflector becomes damaged, it should be replaced.

TO ADJUST HANDLE

The handle can be mounted in a high or

low position. The mounting holes in the bottom of lower handle are off center for

raising or lowering the handle.

•Remove upper handle and all parts attached to lower handle.

•Remove hairpin cotters from lower handle bracket mounting pin.

•Squeeze lower handle in to remove it from mounting pins.

•Turn lower handle over to raise or lower handle.

•Squeeze lower handle in and position

holes onto mounting pins on handle bracket.

•Reassemble upper handle and all parts removed from lower handle.

Mowing

_--_

Mowing _-_,

position

_j

position [._/

Rotate

:-_Lh°nWd/re

ENGINE

ENGINE SPEED

Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that engine is running too fast or too slow, take your mower to an autho- rized service center for repair and

adjustment.

CARBURETOR

Your carburetor has a non-adjustable fixed main jet for mixture control. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to an authorized service center for repair and/or adjustment.

IMPORTANT: Never tamper with the engine governor, which is factory set for the proper engine speed. Overspeeding the engine above the factory high speed scan be dangerous. If you think the engine-governed high speed needs adjusting, contact your nearest authorized service center, which has proper equip- ment and experience to make any necessary adjustments.

I r_^l nn_itinn

Hinh nn_itic, n

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Jcriiftsmiiwj SEARS, Roebuckand CO., D/817 WA, Hoffman ESTATES, Illinois Limited TWO Year Warranty on Craftsman Power MowerGeneral Operation Do not IV. ServicesIII. Children Carton Lawn Mower MaintenanceLawn Mower Performance HOW to SET UP Your Lawn Mower To Unfold HandleStarter handle used for startingthe engine Meets Cpsc Safety RequirementsKnowyour Lawn Mower OIL Howto Useyour Lawn Mower Engine Speed ControlTo Convert to Discharging Mower To Start Engine ADD GasouneImportant For best performance, keep Mowing TipsMulching Mowing Tips Before Each USE Lubrication ChartMaintenance Schedule LubricationAPI-SF/SG/SH SAE Lawn MowerBlade Care TiresEngine Lubrication To Change Engine OILGrass Catcher To Change AIR Filter CleaningAIR Filter MufflerEngine Lawn Mower To Adjust Cutting HeightTo Adjust Handle PositionEngineoil Lawn MowerEngine Fuel System CylinderProblem OtherExcessive vibration Starter rope hard to pull Troubleshooting Chart Problem CauseHousing one 1 setting higher Cutting height too lowService Notes Rotary Lawn Mower Model no Hubcap 71333OOCraftsman 4-CYCLE Engine Model noCraftsman Cycle Engine KEY Part Description37 632547 * O Ring, Main Nozzle Tube Craftsman Cycle Engine Model no Page Page Getit fixed, at your home or ours

917.38741 specifications

The Craftsman 917.38741 is a robust and reliable riding lawn mower designed for homeowners looking to manage their lawns efficiently. This machine combines power, performance, and user-friendly features to make lawn care an effortless task.

At the heart of the Craftsman 917.38741 is a potent engine, typically featuring a 19.5 HP Briggs & Stratton engine. This dependable power source, paired with a smooth-running automatic transmission, allows users to tackle a variety of terrains without compromise. The mower's cutting deck spans 42 inches, offering an efficient cutting path that reduces mowing time while ensuring a clean finish. Crafted with high-quality steel, this deck is not only durable but also designed for optimal airflow, which enhances the grass-cutting efficiency.

One of the standout features of the Craftsman 917.38741 is its adjustable cutting height. With multiple positions available, users can easily set the height according to their preferences, whether they want a professional lawn look or a slightly longer cut during the hotter months. This flexibility helps in maintaining a healthy lawn.

The machine comes equipped with an innovative cutting system, utilizing a twin-blade design that ensures an even and consistent cut. The mulching capability further enhances its utility, allowing grass clippings to be finely chopped and returned to the lawn as natural fertilizer, promoting healthy grass growth.

Comfort has been prioritized in the design of the Craftsman 917.38741. The mower features an ergonomic seat with adjustable settings, ensuring optimal comfort even during extended mowing sessions. The easy-to-use controls are conveniently located, allowing the operator to focus on steering without distractions.

Another notable technology feature is the maintenance-free battery and dual headlights for increased visibility during early morning or late evening mowing sessions. This not only enhances safety but also extends the usability of the mower beyond daylight hours.

In conclusion, the Craftsman 917.38741 is a well-rounded riding lawn mower that offers effective performance, user-friendly features, and innovative technology. It is perfect for homeowners who seek to achieve a manicured lawn efficiently while enjoying ultimate comfort during operation. This mower is designed to last, ensuring that it meets the demanding needs of any yard enthusiast. With its combination of power, versatility, and ease of use, the Craftsman 917.38741 stands out as an excellent choice in the riding mower market.
Top Page Image Contents