Craftsman 917.377431 Lawn Mower, Discharge Guard, Rear Deflector, To REMOVE/REPLACE Drive Belt

Page 14

CAUTION:Beforeperformingany

serviceandadjustments:

•Release control bar and stop engine.

•Make sure the blade and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST cUTrlNG HEIGHT

See "TO ADJUST CUTTING HEIGHT" in

the Operation section of this manual.

DISCHARGE GUARD

The discharge guard, attached to the discharge opening of your lawn mower, is provided to prevent the possibility of injury resulting from objects being thrown out of the discharge opening into the operator mowing position. If the discharge guard becomes damaged, it should be replaced.

REAR DEFLECTOR

The rear deflector, attached between the

rear wheels of your mower, is provided to minimize the possibilitythat objects will be thrown out of the rear of the mower into

the operator mowing position. If the deflector becomes damaged, it should be

replaced.

TO REMOVE/REPLACE DRIVE BELT

pushing down on gear case pulley and

iemove drive cover. Remove belt by rolling belt off it.

Tum lawn mower on its side with carburetor and fuel cap up.

•Remove blade.

•Remove debris shield.

•Remove belt from engine pulley on crankshaft.

•Install new belt by reversing above steps.

•Always use factory approved belt to assure fit and long life.

Drive cover

Push down

TO ADJUST HANDLE

Your lawn mower handle can be raised or lowered for your mowing comfort. Four

(4)positions are available: high, medium high, medium low and low. Handles are

shipped mounted in the medium low position.

•To change from medium low to medium

high position, the upper and lower handle sections will have to be turned

over.

•Remove the cable clips.

•Remove the controls and operator

presence control bar from the upper handle.

•Remove the starter rope guide from the upper handle.

•Remove hairpin cotters.

•Disconnect the lower handle from the

handle brackets.

•Tum the handle over and reassemble

the hairpin cotters that have been removed.

•Reassemble the starter rope guide.

•Reassemble the controls and the

operator presence control bar to the upper handle.

_, CAUTION: Theoperatorpresence control bar must pivot freely to permit

blade/brake engagement when control bar

is released. Do not overtighten the

fasteners holdingthe controls to the upper

handle.

Shipping Position

 

Medium low

Medium high

High

Low

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents £RIIFTSMIIN+ Training Limited TWO Year Warranty on CraftsmanSEARS, Roebuckand CO., D/817 WA, Hoffman ESTATES, Illinois PreparationMaintenance and Storage OperationLawn Mower Maintenance Lawn Mower PerformanceTo Prepare Battery HOW to SET UP Your Lawn Mower To Unfold HandleMeets Cpsc Safety Requirements Know Your Lawn MowerEngine Speed Control HOW to USE Your Lawn MowerTo Install Discharging Deflector Engine Zone ControlGAS Mowing TipsBefore Starrngengine OIL To Start EngineMulching Mowing Tips Before Each USE Lubrication ChartGeneral Recommendations SectionLawn Mower To Replace BladeGrass Catcher Drive WheelsEngine LubricationMuffler CleaningTo Change Engine OIL Spark PlugDischarge Guard To Adjust HandleLawn Mower Rear DeflectorHandle Engine SpeedCarburetor Engine Fuelsystem CyunderOther EngineoilCorrection Troubleshooting ProblemChart Cause Excessive vibration Rotary Lawn Mower --MODEL no KEY Part NO. NO. DescriptionRotary Lawn Mower --MODEL no Gear Case Assembly Part Number U.S. inches Inch = 25.4 mmPage Rotary Lawn MOWER- Model no Rotary Lawn MOWER- Model no KEY Part NO. no Craftsman 4-CYCLE Engine Craftsman 4-CYCLE Engine Model KEY Part DescriptionModel Number KEY Part NO. no590696 DogSpng Craftsman 4.-CYCLE EngineSears

917.377431 specifications

The Craftsman 917.377431 is a robust and versatile lawn tractor designed to meet the needs of homeowners looking to maintain their lawns efficiently and effectively. This machine combines power, comfort, and advanced technology, making it a valuable addition to any gardening arsenal.

One of the standout features of the Craftsman 917.377431 is its powerful 24 HP Briggs & Stratton engine. This engine provides ample power to tackle even the toughest grass and terrain. The 42-inch cutting deck allows for a wide cutting radius, significantly reducing the time spent mowing. Additionally, the deck height can be adjusted to six different positions, ranging from one to four inches, enabling users to customize their cut depending on the type of grass and seasonal lawn care needs.

The lawn tractor uses a hydrostatic transmission system, which offers seamless speed control without the need for shifting gears. This feature enhances user experience, allowing for easy navigation around obstacles and smooth operation across varying terrains. The controls are ergonomically designed, providing comfort and reducing fatigue during extended use.

Safety is also a primary focus with the Craftsman 917.377431. The tractor is equipped with an automatic safety feature that shuts off the engine if the operator leaves the seat, providing peace of mind during operation. The headlights enhance visibility during early morning or late evening mowing sessions, making the machine suitable for use at various times of the day.

Another significant characteristic of the Craftsman 917.377431 is its ease of maintenance. The machine features a dual-blade system that ensures a clean cut while also providing versatility in grass disposal. The convenient side discharge allows clippings to be expelled neatly, while a mulching kit can be added for those who prefer to recycle grass clippings as natural fertilizer.

With a sturdy build and user-friendly design, the Craftsman 917.377431 stands out as an exemplary lawn tractor. Its combination of power, safety features, and customizable cutting options makes it an ideal choice for homeowners aiming for a pristine lawn. Whether you have a small yard or a larger property, this tractor offers the performance and comfort necessary for effective lawn care.
Top Page Image Contents