Craftsman 917.38836 owner manual To Install Attachments, To Unfold Handle

Page 5

HOWTO SET UP YOUR LAWN MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables.

Raise lower handle section to operating

position and squeeze the bottom ends of lower handle towards each other

until the pin in handle can be inserted

into one of the throe height adjustment holes.

Remove protective padding, raise upper handle section into place on

lower handle and tighten both handle knobs.

Remove any packing material from around control bar.

Your handles may be adjusted for your mowing comfort. Refer to Service and

Adjustments section of this manual.

Operator

presence Control bar

handle

Liftup

Mowing

Lowerposi_on handle

Handle

pin

adjustment /bracket

TO INSTALL ATTACHMENTS

Your lawn mower was shipped ready to be used as a mulcher. To convert to

bagging or discharging, see =To convert moweP in the OPERATION section of thi,,

manual.

5

Image 5
Contents Rrftsmrn Preparation SEARS, Roebuckand CO., D/817 WA, Hoffman ESTATES, IllinoisTraining Operation Maintenance and StorageLawn Mower Performance Lawn Mower MaintenanceTo Unfold Handle To Install AttachmentsKnow Your Lawn Mower Meets Cpsc Safety RequirementsTo Convert Mower HOW to USE Your Lawn Mower Engine Speed ControlTo Start Engine OILADD Gasomne Mulching Mowing Tips MowingtipsGeneral Recommendations Lubrication ChartBefore Each USE LubricationTo Replace Blade TiresBlade Care To Change Engine OIL Engine LubricationOver Fill AIR FilterTo Adjust Handle CleaningMuffler Spark PlugEngine Speed To Assemble Grass CatcherCarburetor Engine Fuel System HandleEngineoil Troubleshooting Chart ProblemcauseCorrection CylinderCorrection Troubleshooting Chart Problem CauseCraftsman Rotary Lawn MOWER-- Model no KEY Part Description KEY Part NO. noCraftsman 4-CYCLE Engine Craftsman Cycle Engine Model Number Craftsman 4-CYCLE Engine 590695 Starter Housing Assy Degree grommet 590535 SEAR8