Craftsman 917.387258 owner manual Serialnumber, Ignition, Lawn Mower, Tires, Blade Care

Page 11

PRODUCT

SPECIFICATIONS

 

 

 

SERIALNUMBER

 

 

 

DATE OF PURCHASE

 

 

 

GASOLINE CAPACITY/TYPE:

1.25 QUARTS

 

 

 

 

UNLEADED

REGULAR

OILTYPE

(API-SF/SG/SH):

SAE 30 (ABOVE

32°F)

 

 

 

SAE 5W-30 (BELOW 32°F)

OIL CAPACITY:

 

20 OZS.

 

 

SPARK

PLUG

IGAP: .030")

CHAMPION

RJ19LM OR J19LM

VALVE

CLEARANCE:

INTAKE:

.004

- .008

 

 

 

EXHAUST:

.004

- .008

SOLID STATE

IGNITION

 

 

 

AIR GAP:

 

.0125 IN.

 

 

BLADE

BOLT TORQUE:

35-40 FT. LBS.

 

•The model and serial numbers will be found on a decal attached to the rear of the lawn mower housing.Record both serial number and date of purchase in space provided above.

LAWN MOWER

Always observe safety rules when performing any maintenance.

TIRES

,Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber,

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause

tire damage.

BLADE CARE

For best results, mower blade must be

kept sharp. Replace bent or damaged blades.

TO REMOVE BLADE

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug.

•Turn lawn mower on its side. Make sure air filter and carburetor are up.

•Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt.

•Protect your hands with gloves and/or wrap blade with heavy cloth.

•Remove blade bolt by turning counter- clockwise.

•Remove blade and attaching hardware (bolt, lock washer and hardened washer).

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE

•Position the blade adapter on the engine crankshaft. Be sure key in adapter and crankshaft keyway are aligned.

•Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter.

•Be sure the trailing edge of blade (opposite sharp edge) is up toward the engine.

•Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

•Use block of wood between blade and lawn mower housing and tighten the blade bolt, turning clockwise.

•The recommended tightening torque is 35-40 ft. Ibs.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Icrrftsmrn Preparation Limited ONE Year Warranty on Craftsman Power MowerOperation Maintenance and StorageSafety is Involved Lawn Mower Performance Lawn Mower MaintenanceLower handle Howto SET Upyour Lawn MowerTo Unfold Handle Lift up Ift u PositionImportant This lawn mower is shipped Meets Cpsc Safety RequirementsKnow Your Lawn Mower To AnACH Grass Catcher To Adjust Cutting HeightHowto Useyour Lawn Mower Engine Speed Engine Zone ControlTo Start Engine Before Starting Engine OILADD Gasoline Mowing Tips Before Each USE Lubrication ChartWheel adjuster General RecommendationsTires SerialnumberIgnition Lawn MowerEngine Lubrication ShaftWasher Hardened edge adapter washer Grass CatcherSpark Plug CleaningMuffler Could create a fire hazard and/or damageTo Assemble Grass Catcher To Adjust HandleLawn Mower To Adjust Cutting Height Engine Speed CarburetorEngine Fuelsystem HandleCoer Correction Troubleshooting ChartProblem CauseChart Problem Cause Rotary Lawn Mower Model NU Mber KEY Part NO. NO. Description Rotary Lawn Mower Model NumberCraftsman Cycle Engine Model no ,994022 Craftsman 4-CYCLE EngineModel no CR.FTSMAN 4-CYCLE EngineCraftsman 4-CYCLEENGINE KEY Part NO. no Service Notes Service Notes Sears

917.387258 specifications

The Craftsman 917.387258 is a reliable and versatile lawn tractor that caters to both novice and experienced gardeners. With its robust design, features, and advanced technologies, this model stands out as an ideal choice for maintaining lawns of various sizes.

One of the main features of the Craftsman 917.387258 is its powerful 19.5 horsepower engine. This engine, combined with a 42-inch cutting deck, provides the necessary power to tackle tough grass and uneven terrain with ease. The cutting deck features a stamped steel design, which enhances durability while providing clean and precise cuts. The adjustable cutting height options allow users to customize the height according to their lawn's requirements, ranging from 1.5 to 4 inches.

The Craftsman 917.387258 also employs a Twin Blade Cutting System, which optimizes the mowing performance by ensuring a more even cut. This system also enhances mulching capabilities, ensuring that grass clippings are finely shredded and evenly distributed back onto the lawn. The result is a healthier lawn that benefits from natural fertilization.

The transmission system of the Craftsman 917.387258 benefits from a smooth and responsive automatic drive, making operation simpler and allowing the operator to focus on maneuvering rather than gear changes. This feature is particularly advantageous for those new to riding mowers, providing an easier learning curve.

Ergonomically designed, the tractor offers comfortable seating with an adjustable high-back seat, ensuring that prolonged usage does not lead to discomfort. The steering wheel is also easy to grip, allowing for agile and precise control. Additionally, the intuitive dashboard provides crucial information such as fuel levels, speed, and cutting height, promoting user-friendly operation.

In terms of technology, the Craftsman 917.387258 is equipped with an easy-to-use electric start system, eliminating the need for manual pull starts. This modern convenience ensures that users can get started with minimal effort every time.

With a focus on safety, the lawn tractor features built-in safety measures such as an automatic blade shut-off when the operator leaves the seat. This ensures that safety is prioritized while operating the machine.

Overall, the Craftsman 917.387258 is designed to enhance the mowing experience through its combination of power, durability, and user-friendly features. Whether you have a small garden or a larger yard, this lawn tractor is engineered to meet the diverse needs of homeowners.
Top Page Image Contents