Craftsman 38514 owner manual Do not, IV. Safe Handling of Gasoline

Page 3

IoGENERAL OPERATION

Read, understand,and follow all instructionson the machine and in the

manual(s) before starting. Be thoroughly familiarwith the controls and the proper use of the machinebefore starting.

Do not put hands or feet near or under rotatingparts. Keep clear of the dis- charge opening at all times.

Only allow responsible individuals,who

are familiar with the instructions, to oper- ate the machine.

Clear the area of objects such as rocks, toys, wire, bones, sticks, etc., which could be picked up and thrown by blade. Be sure the area is clear of other people

before mowing. Stop machine if anyone enters the area.

Do not operate the mower when bare- foot or wearing open sandals. Always wear substantial foot wear.

Do not pull mower backwards unless absolutely necessary. Always look down and behind before and while moving backwards.

Never direct discharged material toward anyone. Avoid discharging material

against a wall or obstruction. Material may richochet back toward the opera- tor. Stop the blade when crossing gravel surfaces.

Do not operate the mower without

proper guards, plates, grass catcher or other safety protective devices in place.

See manufacturer's instructions for proper operation and installation of

accessories. Only use accessories ap- proved by the manufacturer.

Stop the blade(s) when crossing gravel drives, walks, or roads.

Stop the engine (motor) whenever you

leave the equipment, before cleaning the mower or unclogging the chute.

Shut the engine (motor) off and wait until the blade comes to complete stop before removing grass catcher.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Never operate machine in wet grass. Always be sure of your footing: keep a firm hold on the handle; walk, never run.

Disengage the self-propelled mech- anism or drive clutch on mowers so

equipped before starting the engine.

If the equipment should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibra- tion is generally a warning of trouble.

Always wear safety goggles or safety glasses with side shields when operating mower.

il, SLOPE OPERATION

Slopes are a major factor related to slip & fall accidents which can result in severe in-

jury. All slopes require extra caution. If you feel uneasy on a slope, do not mow it.

DO:

Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Tall grass can hide obstacles.

DO NOT:

Do not trim near drop-offs, ditches or

embankments. The operator could lose footing or balance.

Do not trim excessively steep slopes.

Do not mow on wet grass. Reduced foot- ing could cause slipping.

i11. CHILDREN

Tragic accidents can occur if the operator

is not alert to the presence of children. Children are often attracted to the machine

and the mowing activity. Never assume

that children will remain where you last saw them.

Keep children out of the trimming area and under the watchful care of another

responsible adult.

Be alert and turn machine off if children enter the area.

Before and while walking backwards, look behind and down for small children.

Never allow children to operate the ma- chine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SAFE HANDLING OF GASOLINE

Use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

Extinguish all cigarettes, cigars, pipes and other sources of ignition.

Use only an approved container.

Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling.

Never refuel the machine indoors.

Never store the machine or fuel contain- er where there is an open flame, spark or pilot light such as a water heater or on other appliances.

Image 3
Contents Craftsman Year Full Warranty on Craftsman Lawn Mower Maintenance ScheduleIV. Safe Handling of Gasoline Do notRJ19LM API SG-SL SAERepair Protection Agreements Lift To Install AttachmentsTo Remove Mower from Carton To Unfold HandleOIL or Gasoline Meets Cpsc Safety RequirementsADD Gasoline To Start Engine MowingTips General Recommendations Before Each USELubrication To Replace Blade TiresBlade Care To Remove BladeMuffler Discharge Guard Squeeze To Adjust Rear DeflectorTo Adjust Handle AwarningLawn Mower OFF Problem CauseCylinder OtherCause Problem28-29 Operacion HacerNo Hacer SG-SL SAE SERVlClORendimiento DE LA Segadora Para Instalar LOS Accesorios Para Remover LA Segadora DE LA Caja DE CartonFamiliaricese CON SU Segadora Motor Velocidad DEL MotorOnsejos Para Segar Para Parar EL MotorMAX Antes DE Cada USOLubricacion Llantas TablaLubricacion SegadoraFiltro DE Aire MotorLimpieza Segadora Para Ajustar LA Altura DE CortePara Ajustar EL Mango Motor Sistema DE Combustible Motor Velocidad DEL MotorAdelante MangoProblema Causa Correccion Solucion ProblemasSolucion est dirigido ProblemaCraftsman Rotary Lawn Mower - Model Number KEY Part NO. no KEY Part DescriptionKEY Part NO, NO, Description Short Block Briggs & Stratton 4=CYCLE EngineOperators Manual Replacement Engine Emissions Label 11330REPAIR ManualKEY Part NO. NO. Description Wrench-Spark Plug 847 691440 Dipstick/Tube Assembly Service Notes Service Notes Need More HELP?

38514 specifications

The Craftsman 38514 is a versatile and reliable tool designed for both professionals and DIY enthusiasts. With its robust features and advanced technologies, it stands out in the competitive market of power tools.

One of the standout features of the Craftsman 38514 is its powerful motor, which provides ample torque and speed for a variety of applications. This ensures that users can tackle tasks ranging from light-duty drilling to more demanding projects with ease. The motor is designed for durability, allowing it to sustain high performance even under heavy use.

Additionally, the 38514 comes equipped with an adjustable speed setting. This feature enables users to customize the tool's output according to the material they are working with. Whether drilling into wood, metal, or plastic, the ability to select the appropriate speed enhances precision and control, delivering optimal results.

Another significant characteristic is its ergonomic design. The Craftsman 38514 features a comfortable grip that reduces user fatigue during extended use. This thoughtful design consideration means that users can work for longer periods without compromising on comfort or control. Coupled with a lightweight construction, this tool is easy to maneuver, making it suitable for both intricate tasks and large-scale projects.

The Craftsman 38514 also embraces modern technology with its cordless operation. This feature eliminates the constraints of power cords, allowing for greater mobility and convenience in various work environments. The tool is powered by a long-lasting lithium-ion battery, which not only provides extended run time but also ensures quick charging capabilities, so users can get back to work without prolonged downtime.

Furthermore, the Craftsman 38514 boasts an integrated LED work light. This facilitates visibility in dimly lit spaces, ensuring users can see their work clearly, regardless of the conditions. This practical addition enhances both safety and accuracy, making it a valuable feature for both professionals and hobbyists alike.

In summary, the Craftsman 38514 is a powerful, versatile, and user-friendly tool, ideal for a wide range of applications. With its advanced motor, adjustable speed settings, ergonomic design, cordless operation, and integrated LED work light, it delivers performance and convenience that meet the needs of modern users. Whether for home improvement projects or professional jobs, the Craftsman 38514 stands out as a dependable choice, combining power and innovation in one remarkable tool.