Craftsman 358.79477 manual Replace Spark Plug, Replace Fuel Filter, Check Muffler Mounting Screws

Page 12

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emissions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Apply a few drops of oil to the filter; squeeze filter to distribute oil.

6.Replace parts.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Igni- tion timing is fixed, nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and discard.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

REPLACE FUEL FILTER

To replace fuel filter, drain unit by run- ning it dry of fuel, then remove fuel

cap/retainer assembly from tank. Pull filter from tank and remove it from the

fuel line. Install new fuel filter on fuel

line; reinstall parts.

INSPECT MUFFLER AND SPARK

ARRESTING SCREEN

_& WARNING: The muffler on this

product contains chemicals known to the State of California to cause cancer.

As the unit is used, carbon deposits build up on the muffler and spark ar- resting screen, and must be removed to avoid creating a fire hazard or af- fecting engine performance.

Muffler Cover

Spark

Arresting

Hood

t

Screws

Replace the spark arresting screen ev- ery 50 hours of operation or if any dam- age or breaks in the screen are noted.

NOTE: Do not attempt to clean the spark arresting screen.

1.Remove 3 screws from muffler cov- er. Remove muffler cover.

2.Loosen and remove 4 screws from the muffler hood.

3.Remove the muffler hood and spark arresting screen.

4.Install new spark arresting screen.

5.Reinstall muffler hood and 4

CHECK MUFFLER MOUNTING

SCREWS

Once each year, ensure muffler mounting screws are secure and tight- ened properly to prevent damage.

Muffler

Mounting Screw

-12-

screws. Tighten screws securely.

6.Reinstall muffler cover and 3

screws. Tighten securely. NOTE: If any part of the muffler is cracked, broken or damaged, we rec- ommend that the muffler be replaced.

CARBURETOR ADJUSTMENT

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the fol- lowing conditions:

•Engine will not idle when the throttle is released.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

•Turn idle speed screw clockwise to

increase engine speed if engine stalls or dies.

•Turn idle speed screw counterclock- wise to decrease engine speed.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Crrftsmrni TWO Year Full Warranty on CRAFTSMAN@ GAS Blower Sears, Roebuck and Co., Hoffman Estates, ILIwarning @@1 Know Your UnitPlan Ahead Handle Fuel with CAUTION, IT is Highly FlammableOperate Your Unit Safely Assembly Maintain Your Unit ProperlyModel Special Notice This unit isBlower Assembly Blower Tube Assembly Vacuum Assembly Vacuum BAG AssemblyHIGH-SPEED Nozzle Assembly Vacuum Tube AssemblyHOW to Convert Unit from Vacuum USE to Blower USE Blower Tube AssemblyVacuum BAG Shoulder Strap Adjustment Stop Switch Blower USE I Vacuum USEKnow Your Blower Mulching BladesPrimer Bulb Start LeverBefore Starting Engine HOW to Stop Your Engine HOW to Start Your EngineStarting a Cold Engine Starting a Warm EngineClean AIR Filter Customer ResponsibilitiesLabels Carburetor Adjustment Replace Spark PlugReplace Fuel Filter Inspect Muffler and Spark Arresting ScreenSeasonal Storage Fuel SystemEngine OtherTroubleshooting Table CauseYour Warranty Rights and OB MAINTENANCE, Replacement and Repair of Emission RE El I 81Repair Parts =/=F=¢ z Repair Parts Sears, Roebuck and Co., Hoffman Estates, IL Conozca SU Aparato Piense Antes DE Proceder Haga USO Seguro DE SU AparatoHaga EL Mantenimiento DEL Aparato EN LA Forma Debida Aviso DE Seguridad El estar exContenido DE LA Caja ModeloMontaje AdvertenoiaMontaje DE LA Boquilla DE Alta Velocidad Montaje DEL AspiradorMontaje DE LA Bolsa DEL Aspirador Montaje DE LOS Tubos DE AspiradorComo Convertir EL Aparato DE USO DE Aspirador a USO DE SopladorAjuste DE LA Banda DEL Hombro Para LA Bolsa DEL Aspirador Montaje DE LA Banda DEL HOM USO DEL Soplador AspiradorConozca SU Soplador Cuchillas DesmenuzadorasBombeador Sugerencias UtilesPalanca DEL Arrancador Posicion DE USOAbastecimiento DEL Motor ImportantePara Detener EL Motor Para Poner EN Marcha EL MotorPara Arrancar CON EL Motor Caliente Arranque DE Motor AhogadoResponsabilidad DEL Usuario TareaRecomen Bacion ES Generales Piezas Sueltas NI Fijadores FlojosVerificar QUE no Haya Piezas Daiiadas NI Gastadas Inspeccione Y Limpie EL Apara To Y SUS PlacasVerifique LOS Tornillos DE Montaje DEL Silenciador Inspeccione EL Silenciador Y LA Rejilla AntichispasAjuste AL Carburador Marcha LentaGuarde el aparato y el combustible MotorEstacional Almacenaje Sistema DE CombustibleTabla Diagnostica CausaGarantia DE Responsabimdad Periodo DE Garantia CualquierPiezas Anadidas O Modificadas MANTENIMIENTO, Reemplazo Y Reparacion DETrol DE Emision Garantizadas 41 I 61 I 81 IPage Page Page Your Home

358.79477 specifications

The Craftsman 358.79477 is a robust and reliable string trimmer designed for both residential and light commercial use. It offers a perfect combination of power, versatility, and user-friendly features that make yard maintenance an effortless task.

One of the standout features of the Craftsman 358.79477 is its powerful engine. Equipped with a 25cc 2-cycle engine, this trimmer delivers impressive cutting performance, ensuring that even the thickest grass and weeds are handled with ease. The engine is designed for efficiency, providing ample power while maintaining reasonable fuel consumption, making it an economical choice for those who need regular yard maintenance.

Versatility is another key characteristic of the Craftsman 358.79477. The unit comes with a detachable head that allows users to switch between different attachments. This means that it can function not only as a string trimmer but also as a brush cutter, cultivator, and even a hedge trimmer with the appropriate attachment. This multifunctionality makes it an excellent investment for homeowners looking to streamline their gardening tools.

The Craftsman 358.79477 is equipped with an easy-to-use bump-feed system that allows users to extend the trimmer line simply by tapping the head against the ground. This feature saves time and enhances productivity, ensuring continuous operation without the need to stop and manually feed the line. Additionally, the trimmer uses a dual-line design which significantly improves cutting efficiency and speeds up the trimming process.

Comfort is also a top priority in the design of the Craftsman 358.79477. It features an adjustable handle that allows for better control and maneuverability during use, making it easy to reach tight spots and tackle difficult angles. The lightweight design further reduces user fatigue, allowing for prolonged use without discomfort.

Moreover, the Craftsman 358.79477 benefits from a robust construction that ensures durability and longevity. Built with high-quality materials, this trimmer is designed to withstand the rigors of regular use, making it a reliable companion for all outdoor maintenance tasks.

In summary, the Craftsman 358.79477 is a powerful, versatile, and user-friendly string trimmer that excels in performance and durability. Its efficient engine, multifunctional capabilities, and comfort-focused design make it a great choice for anyone looking to maintain their outdoor space effectively.
Top Page Image Contents