Orion HP-4600, HP-2600, HP-2400 warranty CEA Specifications, HP-2300

Page 8

CEA SPECIFICATIONS

 

HP-2300

 

Power Output: 50 Watts RMS x 2 at 4 ohms and < 1% THD+N

 

Signal to Noise Ratio: -70 dBA (reference 1 Watt into 4 ohms)

 

Additional Power Output: 75 Watts RMS x 2 at 2 ohm at 14.4 Supply<1% THD+N

 

HP-2400

 

Power Output: 75 Watts RMS x 2 at 4 ohms and < 1% THD+N

 

Signal to Noise Ratio: -75 dBA (reference 1 Watt into 4 ohms)

 

Additional Power Output: 100 Watts RMS x 2 at 2 ohm at 14.4 Supply<1% THD+N

 

HP-2600

 

Power Output: 100 Watts RMS x 2 at 4 ohms and < 1% THD+N

 

Signal to Noise Ratio: -75 dBA (reference 1 Watt into 4 ohms)

 

Additional Power Output: 175 Watts RMS x 2 at 2 ohm at 14.4 Supply<1% THD+N

 

HP-4600

 

Power Output: 50 Watts RMS x 4 at 4 ohms and < 1% THD+N

 

Signal to Noise Ratio: -80 dBA (reference 1 Watt into 4 ohms)

 

Additional Power Output: 75 Watts RMS x 4 at 2 ohm at 14.4 Supply<1% THD+N

 

© 2006 Directed Electronics, all rights reserved

7

Image 8
Contents Warranty Contents What’s in the Box IntroductionPractice Safe Sound HP-2300, HP-2400, HP-2600 Controls Record Your Serial Number and DateEND Panel Layouts HP-2300, HP-2400, HP-2600 Connections HP4600 ControlsHP4600 Connections Directed Electronics, all rights reserved CEA Specifications HP-2300Specifications Amplifier Section HP-2300 HP-2400 HP-2600Amplifier Section HP-4600 Amplifier Settings Adjusting Intelli-Bass High-Pass CrossoverInfinite Baffle Example High-Pass Set at 30Hz Sealed Example High-Pass Set at 20HzRemote Bass Operation optional Sealed Example High-Pass Set at 30HzVented Example High-Pass Set at 30Hz High Level Input Harness Amplifier WiringPower Connections Speaker Connections HP-2300, HP-2400, and HP-2600 One Channel/Two Channel ConfigurationBridge Configuration Three Channel Channel 1, Channel 2, Bridged Four Channel Stereo Configuration Speaker Connections HP-4600Three Channel Stereo/Bridged Configuration Tri-Mode Six Channel Configuration Amplifier Installation General Precautions and Installation TipsChoosing Mounting Locations Passenger CompartmentStep By Step Installation Tools of the TradeSET UP and Troubleshooting Testing the SystemAdjusting the Sound of the System Troubleshooting Tips Symptom Probable Cause Action To TakeInternal Crossover Configuration Directed Electronics, all rights reserved Directed Electronics, all rights reserved