STEP 13 - ATTACH BAG BOTTOM
•Insert the bag frame strap into the stitched sleeve at the front edge of the bag bottom. See fi gure 11.
BAG FRAME STRAP
STITCHED
SLEEVE
FIGURE 11
•Assemble the bag frame strap to the holes in the lower hopper tubes using two clevis pins (O) and hair cotter pins (M). See fi gure 12.
BAG FRAME STRAP
HAIR COTTER
PIN (M)
CLEVIS PIN (O)
FIGURE 12
•Fold the bag fl aps around the lower hopper tubes and attach to the bag bottom using the snaps. See fi gure 13.
SNAP | FLAP |
|
FIGURE 13
STEP 14 - ASSEMBLE HOPPER CLAMPS
•Assemble two hopper mount clamps (Q) over the hole in the middle of each upper hopper tube using two carriage bolts ( E) and two nylock nuts (F). Tighten only fi nger tight. See fi gure 14.
5/16" x 3/4" | 5/16" NYLOCK |
CARRIAGE | NUT (F) |
BOLT (E) |
|
HOPPER
MOUNT
CLAMP (Q)
UPPER
HOPPER
TUBE
FIGURE 14
8