Gardena EJ3000 manual Storage, Maintenance

GB

5. Storage

Storage: Store unit unplugged, well out of the reach of children.

1.Stop unit and disconnect from the mains electricity supply.

2.Allow motor to cool before storing or transporting.

3.Store unit with all guards in place. Position unit so that any sharp object cannot accidentally cause injury.

Extended storage:Prepare unit for storage at the end of the season or if it will not 

be used for 30 days or more.

If your blower is to be stored for a period of time:

1.Stop unit and disconnect from the mains electricity supply.

2.Clean the entire unit before lengthy storage.

3.Open inlet cover and clean any dirt, grass, or debris that  has collected. Inspect the blower and all tubes. 

Close and make sure the cover is latched.

4.Use a soft brush to clean air vents and air inlet of debris.  Do not use water.

5.Store your unit and extension cord in a well ventilated area and covered, if possible, to prevent dust and dirt accumulation.  Do not cover with plastic. Plastic cannot breathe and may cause condensation and eventual rust or corrosion.

6.Check entire unit for loose screws. 

Replace any damaged, worn, or broken parts.

7.Remove tube(s) for easier storage.

Disposal:	This product must not be added to normal household waste. 
(in accordance with	It must be disposed of in line with local environmental regulations.
EU-directive 2002/96/EC)

6. Maintenance

WARNING: Stop the unit and disconnect the plug from the power source before making any adjustments, changing accessories, or performing ­maintenance.

Such preventive safety measures reduce the risk of starting the power tool ­accidentally.

BEFORE EACH USE
Check for loose fasteners 	Keep all nuts, bolts and screws tight to be sure the product is 
and parts:	in a safe working condition. Be sure all parts are assembled
	­properly.
	• Inlet Cover
	• Blower Tube
	• Vacuum Tubes
	• Collection Bag
Check for damaged or 	Contact your authorized service dealer for replacement of
worn parts:	­damaged or worn parts.
	• ON/OFF Switch – Ensure switch functions properly by moving
	the switch to the OFF position. Make sure motor stops; 
	then restart motor and continue.
	• Inlet Cover – Discontinue use of unit if inlet cover fails to latch
	properly or if it is damaged in any way.
AFTER EACH USE
Inspect and clean unit 	• After each use, inspect complete unit for loose or damaged
and labels:	parts. Clean the unit using a damp cloth.
	• Wipe off unit with a clean dry cloth.
Clean collection bag:	IMPORTANT: THE COLLECTION BAG MUST BE PROPERLY
	EMPTIED.
	• You must properly empty and maintain the collection bag to
	avoid deterioration and obstruction of air flow.
	• Remove the collection bag from the unit and empty after each
	use. Do not store bag without emptying the bag of all contents
	(grass, leaves, etc.).
	• Wash the bag once a year. Remove the bag from the blower 
	and turn the bag inside out. Wash the bag with a water hose.
	Allow the bag to hang and dry completely before you reuse 
	the bag.

GB

24 25