EU Certificate of Conformity
The undersigned GARDENA Manufacturing GmbH,
Description of Unit | Electric Chainsaw |
Type(s) | |
Year of CE Marking | 2009 |
EU Directives:
98/37/EC, 2004/108/EC, 2000/14/EC Harmonised EN:
in accordance with article 8 section 2c | MEEI Kft., 1007 | |
| Váci út | |
| 1132 Budapest | |
| Hungary |
|
Certificate no | M3 2992559 | (CST |
| M3 2992560 | (CST |
Working area related emission characteristic Level LpA according to ISO 22868 given in the table.
Vibrations Value ah according to ISO 22868 given in the table.
The Noise Level LWA values according to 2000/14/EC are given in the table.
Conformity Assessment Procedure | Annex V |
|
| |
Ulm 16/07/2009 |
|
|
| |
Peter Lameli |
|
|
| |
Technical Dept. Manager |
|
|
| |
|
|
|
| |
| Type |
|
| |
| Dry Weight (Kg) | 5.6 | 5.5 | |
| Power (kW) |
| 1.9 | 2.0 |
| Oil tank volume (cm3) | 180 | 180 | |
| Chain pitch (inches) | 3/8 | 3/8 | |
| Chain gauge (mm) | 1.3 | 1.3 | |
| Maximum length of guide bar (mm) | 350 | 400 | |
| Measured Sound Power LWA (dB(A)) | 106 | 106 | |
|
|
|
| |
| Guaranteed Sound Power LWA (dB(A)) | 108 | 108 | |
| Sound pressure Level Lpa (dB(A)) | 95 | 95 | |
| Value ah (m/s2) |
| 5.9 | 5.3 |
| Uncertainty K of ah (m/s2) | 1.5 | 1.5 | |
|
|
|
| |
| 0.310 | 0.314 | ||
| Cutting Speed (m/s) | 12 | 15 | |
|
|
|
|
|
EN 61000-3-11 Compliance statement
Depending on the characteristics of the local electricity supply network, use of this product may result in short voltage drops at the instant of switching on. This may influence other electrical equipment e.g a momentary dimming of a lamp. If the Mains impedance Zmax of your electricity supply is less than the value shown in the table (applicable to your model) then these effects will not occur. The value of the network impedance may be determined by contacting your electricity supply authority