Weed Eater 532 43 46-60, G26LRV, 960 73 00-27 Assembly, Rear Drawbar See A, 1B, See a and 2B

Page 5

ASSEMBLY

1 REAR DRAWBAR (See Fig. 1A, 1B)

1.Remove existing drawbar by removing four screws. Insert flat screwdriver to remove bumper from engine plate. Lift up and pull rearward.

DRAWBAR

ENGINE PLATE

Fig. 1A

2.Install new drawbar by replacing screws removed in step 1.

DRAWBAR

Fig. 1B

2

REAR MOUNTING BRACKET

 

(See Fig. 2A and 2B)

NOTE: Your new drawbar already has four (4) shoulder bolts installed. Simply hang the mounting bracket on the bolts.

SHOULDER

BOLTS

SUPPORT

ASSEMBLY

Fig. 2A

TO REMOVE THE SUPPORT ASSEMBLY (See Fig. 2B)

1.Pull outward on the stop bracket enough to allow support assembly to be lifted up and away from drawbar.

PULL OUT ON STOP

BRACKET TO REMOVE

SUPPORT ASSEMBLY

Fig. 2B

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model Number G26LRV Product No 73 Inch Mower Grass Catcher General Operation Safety RulesTable of Contents Know Your Grass Catcher Parts Identification Carton ContentsSee a and 2B AssemblyRear Drawbar See A, 1B Container Mounting See Fig Support Assembly See FigLower Chute See Fig Install Deflector Guard See FigUpper Chute See a and 7B Blade REMOVAL/REPLACEMENT See FigLevel Mower Deck Counterweight See FigTips for Improved Bagging Operation OperationBlade Care MAINTENANCE, Service or Adjust MentsCustomer Responsibilities KEY Part KEY Part Description
Top Page Image Contents