Weed Eater 530086792 Operating the Coupler, Removing Attachment, Installing Attachment Hanger

Page 6

OPERATING THE COUPLER

Your powerhead is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL:

Edger . . . . . . . . . . . . . . . . . . . . . . . .1000E Cultivator . . . . . . . . . . . . . . . . . . . . 2000T Blower . . . . . . . . . . . . . . . . . . . . . . .3000B

WARNING: Always disconnect pow- erhead spark plug before removing or instal- ling attachments.

REMOVING ATTACHMENT

CAUTION: When removing or installing at- tachments, place the powerhead and attach- ment on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

Upper Tube

Coupler

INSTALLING ATTACHMENT

HANGER

An attachment hanger is provided for storage when attachment is not in use. To install hang- er on attachment:

1.Remove the tube cap from the attach- ment (if present) and discard.

2.Press and hold the locking/release but- ton.

3.Push hanger onto the attachment until the locking/release button snaps into the hole.

OPERATING POSITION

ALWAYS WEAR:

Eye Protection

Heavy,

Long Pants

Lower

LOOSEN

Boots

Attachment

TIGHTEN Knob

2.Press and hold the locking/release but- ton.

Locking/Release

Button

Coupler

Upper Tube

Lower Attachment

 

3.While securely holding the upper tube, pull the attachment straight out of the coupler.

INSTALLING ATTACHMENT

1.Remove the tube cap from the attach- ment (if present) and discard.

2.Position locking/release button of attach- ment into guide recess of upper tube cou- pler.

Coupler Primary Hole

Guide Recess

Upper Locking/ Attachment

Tube Release

Button

3.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

4.Before using the unit, tighten the knob se- curely by turning clockwise.

Cut from your left to your right.

NOTE: This brushcutter attachment is not designed for use with electric powerheads.

When operating unit with brushcutter attach- ment, clip shoulder strap onto upper shoulder strap clamp, stand as shown and check for the following:

SWear eye protection and heavy clothing.

SKeep arms extended with right hand holding

the trigger handle of powerhead.

SKeep left arm extended with left hand hold-

ing the handlebar.

SKeep unit below waist level.

SShoulder strap pad should be centered on your left shoulder and danger sign centered

on your back.

SMaintain full weight of tool on left shoulder. S Without bending over, keep the blade near and parallel to the ground and not crowded in-

to material being cut.

OPERATING INSTRUCTIONS FOR BRUSHCUTTER ATTACHMENT

SBlade Thrust is a reaction that only occurs when using a bladed unit. This reaction can cause serious injury such as amputation. Carefully study this section. It is important that you understand what causes blade thrust, how you can reduce the chance of its occur- ring, and how you can remain in control of unit

if blade thrust occurs.

SWHAT CAUSES BLADE THRUST --Blade Thrust can occur when spinning blade con- tacts an object that it does not cut. This contact causes blade to stop for an instant and then suddenly move or “thrust” away from object that was hit. The “thrusting” reaction can be violent enough to cause operator to be pro- pelled in any direction and lose control of unit. The uncontrolled unit can cause serious injury if blade contacts operator or others.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Manual de Instrucciones Manuel d’Instructions Operator Safety Always WearCutting Safety UNIT/MAINTENANCE SafetyFuel Safety Transporting and StorageTools Required Handlebar AssemblyShoulder Strap Assembly Handlebar Clamp BaseKnow Your Brushcutter Attachment Powerhead END AttachmentLower Shoulder Strap Clamp BladeOperating the Coupler Installing Attachment HangerInstalling Attachment Removing AttachmentCheck for Damaged or Worn Parts Inspect and Clean Unit and DecalsBlade Maintenance Check for Loose Fasteners and PartsBlade Replacement GearboxSeasonal Storage Other Rights Which Vary from This Warranty Gives YOU SpecificLegal RIGHTS, and YOU MAY have State to State

4000C, 530086792 specifications

The Weed Eater 4000C, model number 530086792, is a versatile and powerful outdoor tool designed for homeowners and landscaping professionals alike. Perfectly engineered for ease of use and efficiency, this string trimmer combines innovative features and technology to meet a variety of lawn care needs.

One of its standout features is the powerful 40cc two-cycle engine, which provides robust performance for tackling thick grass, weeds, and underbrush. This engine delivers consistent power and reliability, ensuring that users can complete their trimming tasks quickly and efficiently. Additionally, the lightweight design of the Weed Eater 4000C allows for easy maneuverability, reducing user fatigue during extended use.

Another significant characteristic of the 4000C is its adjustable cutting width. Users can select from various cutting widths, allowing for adaptability based on different landscaping tasks. For wider areas, a larger cutting width makes quick work of grass and weeds, while a smaller width is perfect for precise trimming around delicate flower beds and trees.

The Weed Eater 4000C is equipped with an easy-to-load bump-feed head, which allows users to quickly advance the line with a simple bump on the ground. This feature saves time and effort, enabling users to focus on the task at hand rather than stopping to fuss with tangled line. The 0.095-inch dual-line system enhances cutting efficiency, providing a clean, neat finish along edges.

This trimmer also features ergonomic handles that promote comfort during operation. The design reduces strain on the user's hands and arms, supporting longer work sessions without discomfort. An integrated anti-vibration system further enhances user experience by minimizing vibrations, resulting in less fatigue.

For maintenance ease, the 4000C model includes accessible air filters and spark plugs, making upkeep straightforward. Moreover, the tool comes with a durable construction that withstands the rigors of regular use, ensuring a long product lifespan.

In conclusion, the Weed Eater 4000C model 530086792 excels in blending power and convenience. With its reliable engine, adjustable cutting width, bump-feed line advancements, and ergonomic design, it stands out as a top choice for those looking to maintain their lawns efficiently and effectively. Whether for residential or professional landscaping use, the 4000C is engineered to deliver impressive results every time.
Top Page Image Contents