Weed Eater 530088756 Know Your Unit, Plan Ahead, Handle Fuel with CAUTION, IT is Highly Flammable

Page 2

WARNING: Failure to follow all Safety Rules and Precautions can result in serious injury.

KNOW YOUR UNIT

D Read your Operator’s Manual carefully until you completely understand and can follow all warnings and safety instructions before operating the unit.

DRestrict your unit to users who understand and will follow all warnings and safety in- structions in this manual.

PLAN AHEAD

DAlways wear eye protection when operat- ing, servicing, or performing maintenance on your unit. Wearing eye protection will help to prevent rocks or debris from being blown or ricocheting into eyes and face which can result in blindness and/or seri- ous injury. Eye protection should meet the

requirements of ANSI Z87.1

D Always wear foot protection. Do not go barefoot or wear sandals.

DAlways wear respirator or face mask when

working with unit in dusty environments. D Secure hair above shoulder length. Se- cure or remove jewelry, loose clothing, or clothing with loosely hanging straps, ties, tassels, etc. They can be caught in moving

parts.

DDo not operate the unit when you are tired, ill, upset, or if you are under the influence of alcohol, drugs, or medication.

D Keep children, bystanders, and animals away from work area a minimum of 30 feet (10 m) when starting or operating unit. Do not point the blower nozzle in the direction of people or pets.

D Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can rico- chet, be thrown, or otherwise cause injury or damage during operation.

HANDLE FUEL WITH CAUTION, IT IS HIGHLY FLAMMABLE

D Eliminate all sources of sparks or flame (including smoking, open flames, or work that can cause sparks) in the areas where fuel is mixed, poured, or stored.

DMix and pour fuel in an outdoor area; store fuel in a cool, dry, well ventilated place; and use an approved, marked container for all

fuel purposes.

DDo not smoke while handling fuel or while

operating the unit.

DMake sure the unit is properly assembled

and in good operating condition.

D Do not fill fuel tank while engine is hot or running.

DAvoid spilling fuel or oil. Wipe up fuel spills

before starting engine.

DMove at least 10 feet (3 meters) away from fuel and fueling site before starting engine.

D Always store gasoline in a container ap- proved for flammable liquids.

OPERATE YOUR UNIT SAFELY

WARNING: Stop the engine before opening the vacuum inlet door. The engine must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades.

D Inspect unit before each use for worn, loose, missing, or damaged parts. Do not use until unit is in proper working order.

DKeep outside surfaces free of oil and fuel. D Never start or run engine inside a closed room or building. Breathing exhaust fumes

can kill.

D To avoid static electricity shock, do not wear rubber gloves or any other insulated gloves while operating the unit.

D Do not set unit on any surface except a clean, hard area while engine is running. Debris such as gravel, sand, dust, grass, etc. could be picked up by the air intake and thrown out through discharge open- ing, damaging unit, property, or causing serious injury to bystanders or operator.

D Avoid dangerous environments. Do not use in unventilated areas or where explo- sive vapors or carbon monoxide build up could be present.

D Do not overreach or use from unstable surfaces such as ladders, trees, steep slopes, rooftops, etc. Keep firm footing and balance at all times.

D Never place objects inside the blower tubes; always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to rico- chet which can hurt people or animals, break glass, or cause other damage.

D Never run unit without the proper equip- ment attached. When using your unit as a blower, always install blower tubes. When using your unit as a vacuum, always install vacuum tubes and vacuum bag assembly. Make sure vacuum bag assembly is com- pletely zipped.

D Check air intake opening, blower tubes, vacuum tubes, and elbow tube frequently, always with the engine stopped and the spark plug disconnected. Keep vents and discharge tubes free of debris which can accumulate and restrict proper air flow.

D Never place any object in the air intake opening as this could restrict proper air flow and cause damage to the unit.

D Never use for spreading chemicals, fertil- izers, or other substances which may con- tain toxic materials.

D To avoid spreading fire, do not use near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc.

D Use only for jobs explained in this manual.

-- 2 --

Image 2
Contents Twister SB180 Handle Fuel with CAUTION, IT is Highly Flammable Know Your UnitPlan Ahead Operate Your Unit SafelyPreparation Blower Tube AssemblyMaintain Your Unit Properly Before Starting the Engine Carburetor AdjustmentsTo Stop the Engine Starting a Warm EngineTroubleshooting Table Cause Remedy Your Warranty Rights and OB

530088756, SB30, SB180 specifications

The Weed Eater SB30, SB180, and 530088756 are notable models in the realm of outdoor power equipment. Each is designed with the user in mind, offering efficiency, ease of use, and robust performance for tackling various yard maintenance tasks. Understanding the features and technologies that define these models can help potential buyers make informed decisions.

The Weed Eater SB30 is a lightweight string trimmer, specifically engineered for easy handling and maneuverability. It boasts a powerful 30cc 2-cycle engine that delivers excellent cutting performance while remaining fuel-efficient. The SB30 features a curved shaft design, allowing for comfortable operation and access to hard-to-reach areas. One standout feature is its semi-automatic string feed system, which ensures that the cutting line is fed smoothly without the need for frequent manual adjustments.

Moving on to the SB180, this model is an upgrade that incorporates enhanced power and efficiency. With a robust 18-inch cutting swath, it is perfect for medium to large yards. The SB180 features an easy-start system, making it user-friendly and reducing the frustration often associated with starting 2-cycle engines. The shield and safety guard design prevent debris from flying towards the user, ensuring safety while trimming grass and weeds. Moreover, the adjustable handle provides ergonomic comfort for extended use, minimizing user fatigue.

The 530088756 model is engineered with advanced technology, making it a versatile tool for various landscaping tasks. It incorporates a unique dual-line bump feed head, which allows for a more aggressive cut and faster line feed, enhancing productivity. The sturdy construction of this model ensures that it can withstand rigorous use while maintaining reliable performance. Its lightweight design does not compromise power, making it suitable for both residential and commercial applications.

Overall, the Weed Eater SB30, SB180, and 530088756 models showcase a commitment to powerful performance, innovative technology, and user-friendly design. Whether you're tackling small gardens or expansive lawns, these trimmers have the features needed to make yard maintenance efficient and effective. Investing in any of these models is a step towards a well-manicured outdoor space.