Weed Eater 530088049, EBV 210 Double Insulation Construction, UNIT/MAINTENANCE Safety

Page 3

SKeep the extension cord clear of opera-

tor and obstacles at all times. Do not ex- pose cords to heat, oil, water, or sharp edges.

S Avoid any body contact with any grounded conductor, such as metal fences, or pipes, to avoid the possibility of electric shock. Don’t handle plug or unit with wet hands.

SDo not use with damaged cord or plug. If unit is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to your au-

thorized service dealer for repair.

S Ground Fault Circuit Interrupter (GFCI) protection should be provided on the cir- cuit or outlet to be used for this unit. Re- ceptacles are available having built-in GFCI protection and may be used for this measure of safety.

SKeep others including children, animals, bystanders, and helpers a minimum of 30 feet (10 meters) away. Stop the mo- tor immediately if you are approached. Do not allow the unit to be used as a toy.

DOUBLE INSULATION

CONSTRUCTION

This unit is double insulated to help protect against electric shock. Double insulation construction consists of two separate “layers” of electrical insula- tion instead of grounding.

Tools and appliances built with a double insulation system are not in- tended to be grounded. No grounding means is provided on this unit, nor should a means of grounding be add- ed to this unit. As a result, the exten- sion cord used with your unit can be plugged into any standard 120 volt electrical outlet. Safety precautions must be observed when operating any electrical tool. The double insulation system only provides added protection against injury resulting from an internal electrical insulation failure.

WARNING: All electrical repairs to this unit, including housing, switch, mo- tor, etc., must be diagnosed and re- paired by qualified service personnel. Replacement parts for a double insu- lated appliance must be identical to the parts they replace. A double insulated appliance is marked with the words “double insulation” or “double insu- lated”. The symbol (square within a square) may also be marked on the ap- pliance. Failure to have the unit repaired by Sears service personnel can cause the double insulation construction to be-

come ineffective and result in serious in- jury.

UNIT/MAINTENANCE SAFETY

STurn off all controls and allow the motor to stop before disconnecting the unit

from the power source.

S Disconnect the unit from the power source when not in use. Do not leave the unit when it is plugged into outlet.

SDo not set the unit on any surface ex- cept a clean, hard area while the unit is running. Debris such as gravel, sand, dust, grass, etc., could be picked up by the air intake and thrown out through the discharge opening, damaging the unit, property, or causing serious injury to by-

standers or operator.

SDo not overreach or use from unstable surfaces such as ladders, trees, steep slopes, rooftops, etc. Use extra care when cleaning on stairways. Keep firm

footing and balance at all times. Keep hands out of tubes.

SInspect the entire unit before each use for worn, loose, missing, or damaged parts. Do not use until the unit is in

proper working order.

SDisconnect unit from power source be- fore servicing, cleaning, performing

maintenance, or storing.

S This unit is double insulated. See the

DOUBLE INSULATION CONSTRUCTION

section. Have all internal service per- formed by qualified service repair per- sonnel to avoid creating a hazard or voiding your warranty.

S Have all maintenance other than the recommended procedures described in the instruction manual performed by your authorized service dealer.

S Always see your authorized service dealer to replace a damaged impeller. Parts that are chipped, cracked, broken, or damaged in any other way can fly apart and cause serious injury. Replace damaged parts before using the unit.

SNever place any object in the air intake opening as this could restrict proper air

flow and cause damage to the unit.

SNever douse the unit with water or other liquids or squirt with a water hose. Clean with a damp sponge and mild soap.

See STORAGE.

S Check air intake openings and tubes frequently, always with the unit stopped and power source disconnected. Keep vents and tubes free of debris which can accumulate and restrict proper air flow.

S Do not burn, incinerate, or expose this unit to extreme heat.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Manual de Instrucciones Manuel d’Instructions Or explosive vapors can build up Operator SafetyElectrical Safety Nameplate of the unitDouble Insulation Construction UNIT/MAINTENANCE SafetyBlower Safety Vacuum SafetyStandards Standard screwdriver is required for assembly Blower AssemblyVacuum Assembly Stop unit and unplug the extension cord Collection BAG AssemblyAdjusting the Shoulder Strap on the Collection BAG HOW to Convert Unit from Vacuum USE to Blower USEOperating Position Select AN Extension CordStopping Your Unit Starting Your UnitGeneral Recommendations Using Your Unit AS a BlowerUsing Your Unit AS a Vacuum Inspect and Clean Unit & LabelsEr must be held open through all re- maining steps HOW to Remove AN Object from the AIR IntakeTroubleshooting Table Symptom Cause RemedyElectrolux Home PRODUCTS, INC Electrolux Home Products

530088049, EBV 210 specifications

The Weed Eater 530088049, EBV 210, is a powerful and versatile tool that stands out in the realm of outdoor maintenance equipment. Designed for efficiency and ease of use, this model is ideal for both casual homeowners and professional landscapers looking to tackle lawns, gardens, and other green spaces with precision.

One of the main features of the EBV 210 is its lightweight design, making it easy to maneuver during extended use. Weighing in at a manageable rate, users can comfortably maneuver the unit without experiencing fatigue. This is particularly important for tasks that require prolonged operation, such as clearing large areas of grass or weeds.

The EBV 210 is equipped with a robust 21cc engine that delivers reliable power, ensuring high-performance cutting and trimming. This engine provides the perfect balance between performance and fuel efficiency, allowing users to complete their tasks without frequent refueling interruptions. The efficient combustion system helps reduce emissions, making it a more environmentally friendly choice compared to older models.

This weed eater features a straight shaft design, which allows for better access to hard-to-reach areas, such as under bushes or around fences. The comfort grip handle is ergonomically designed, minimizing strain on the hands and wrists, enabling users to maintain control and comfort during operation.

Another noteworthy characteristic of the EBV 210 is its easy starting technology. With a simple pull-start mechanism, users can quickly get to work without the frustration often encountered with traditional starters. Moreover, the unit’s easy feed system for the cutting line ensures that users can quickly reload without unnecessary downtime.

The Weed Eater 530088049 also incorporates a dual-line head that enhances cutting efficiency. This feature allows for a wider cutting path, enabling users to clear more ground in less time. The reliable string trimmer option makes it suitable for a variety of applications, from trimming grass to edging sidewalks.

In conclusion, the Weed Eater 530088049, EBV 210, is a well-equipped outdoor tool designed to meet the needs of various users. With its lightweight design, powerful engine, and innovative features, it offers a combination of performance, efficiency, and user comfort that makes it an invaluable addition to any gardener's toolkit. Whether you're maintaining your home lawn or handling professional landscaping tasks, the EBV 210 stands ready to deliver outstanding results.
Top Page Image Contents