Collection BAG Assembly

4.To attach the lower vacuum tube to the upper vacuum tube, first align the arrows on the two tubes. Then, press the two tubes together until the lower tube is securely seated in the upper tube (about 3 inches).

Upper Tube Lower Tube

Align arrows on upper and lower tubes

1.Open the zipper on the collection bag and insert the elbow tube.

2.Push the small end of the elbow tube through the small opening in the bag.

NOTE: Make sure edge of the small opening is flush against the flared area of the elbow tube and the hole for the tube release button is on top.

	Elbow Tube	Tube
		Release
		Button
		Hole
	Zipper	Small
	Opening	Small
	Opening	Opening
		Opening

3.Close the zipper on the bag. Make sure the zipper is closed completely.

4.Align the grooves on the elbow tube with the grooves on the blower outlet.

5.Push the elbow tube onto the blower outlet until it snaps into place (elbow tube is secured by red tube release button).

ADJUSTING THE SHOULDER STRAP ON THE COLLECTION BAG

1.Carefully loop the shoulder strap through the buckle as shown in the il- lustration below.

Last In

First In

2.Position the unit on your right-hand side, blower outlet and bag pointing toward the rear. Hold the unit in an upright position with the lower vacu- um tube on the ground to support it.

3.Place the shoulder strap over your head and onto your left shoulder.

4.Adjust the strap to allow a free flow of air from the blower. If the collection bag is kinked, the unit will not operate properly.

NOTE: The strap is designed to posi- tion the collection bag on your shoulder without kinks. The strap is not intended to support the weight of the unit.

Shoulder strap on left shoulder

No kinks in bag allows free air flow

HOW TO CONVERT UNIT FROM VACUUM USE TO BLOWER USE

1.Stop unit and unplug the extension cord.

2.Remove the vacuum tubes by insert- ing the tip of a screwdriver into the latch area on the vacuum assist han- dle. Gently tilt handle of screwdriver toward the front of the unit to release the latch while pulling up on the vacu- um assist handle with your other hand.

Latch Area

Vacuum

Assist

Handle

3.Install the inlet restrictor that was re- moved when assembling for vacuum use.

NOTE: If you are unable to locate the inlet restrictor, the unit will still operate. This restrictor improves the blower function.

4.Remove the collection bag.

5.Close the inlet cover and make sure it is latched closed.

6.Re-install the blower tube. Refer to AT- TACHING THE BLOWER TUBE for instructions on how to attach this item.

SELECT AN EXTENSION CORD

Use only a 120 A.C. voltage supply as shown on nameplate of the unit to power your blower.

545117525, EBV 215 specifications

The Weed Eater EBV 215, model number 545117525, stands out in the market of outdoor power equipment, specifically designed to deliver robust performance for lawn care enthusiasts and professionals alike. This lightweight yet powerful leaf blower combines ergonomics with cutting-edge technology, making yard maintenance more efficient and comfortable.

One of the key features of the EBV 215 is its 25cc two-stroke engine. This engine provides ample power to tackle a variety of debris, from leaves to small twigs, making it an essential tool for keeping your garden tidy. The engine's design not only enhances performance but also reduces fuel consumption, allowing users to complete their tasks without frequent refueling, thereby saving time and money.

The EBV 215 incorporates an easy start system, simplifying the ignition process. The user's experience is further enhanced by the adjustable throttle, allowing operators to customize power output based on the specific task at hand. Whether clearing a driveway or preparing garden beds, this blower offers versatility that caters to various landscaping needs.

An ergonomic design is critical for users who may spend extended periods operating this equipment. The EBV 215 features a lightweight construction, reducing user fatigue and promoting comfort during prolonged use. Coupled with its cushioned grip, this model ensures that maneuverability is not compromised, making it easier to reach all corners of the yard.

Another noteworthy feature is its variable speed control, giving users the ability to adjust the airflow seamlessly. This flexibility is essential for effectively removing debris without damaging delicate plants or surfaces. The fan design maximizes air volume while minimizing noise, creating a more pleasant experience for both the user and the surrounding environment.

Maintenance is straightforward with the EBV 215 thanks to its easy access to the air filter and spark plug. Regular maintenance ensures optimal performance and longevity, making this model a smart investment for anyone serious about lawn care.

In conclusion, the Weed Eater EBV 215, with its powerful engine, ergonomic design, and user-friendly features, is an ideal choice for those looking to efficiently manage yard work. Its balance of power and comfort makes it a preferred tool for both amateur gardeners and professional landscapers alike. Reliable and effective, the EBV 215 ensures that your outdoor spaces remain pristine and well-maintained throughout the seasons.