Storage

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed, nonadjustable.

NOTE: This spark ignition system complies with the Canadian standard ICES--002.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this product contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen and must be removed to avoid creating a fire haz- ard or affecting engine performance.

For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recom- mend that your muffler be serviced or re- placed by your authorized service dealer.

CARBURETOR ADJUSTMENTS

There is no screw for idle adjustment on your blower. The throttle lever is used to control en- gine speed. The engine speed can be ad- justed by moving the throttle lever to the left for low speed or right for high speed. If your engine will not run properly or you require fur- ther assistance, contact an authorized ser- vice dealer or call 1--800--554--6723.

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit

before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position

unit so that any sharp object cannot acci- dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.If your unit is to be stored for a period of time:

S Clean the entire unit before lengthy stor- age.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or fuel storage container. Follow the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to

another.

SReplace your gasoline can if it starts to rust.

-- 8 --

952711937 specifications

The Weed Eater 952711937 is a versatile and reliable tool that has garnered attention among gardening enthusiasts and professionals alike. Known for its efficient performance and user-friendly design, this trimmer is an excellent choice for anyone looking to maintain a pristine garden or lawn.

One of the standout features of the Weed Eater 952711937 is its powerful 2-cycle engine. This engine delivers sufficient power to tackle the toughest weeds and overgrown grass, ensuring that users can cover large areas without the need for frequent breaks. The engine is designed for easy starting, which reduces frustration and saves time when beginning yard work.

The lightweight design of the Weed Eater 952711937 is another significant advantage. Weighing in at only a few pounds, it allows for easy maneuverability, making it ideal for longer gardening sessions without causing fatigue. The trimmer features an ergonomic handle that offers a comfortable grip, further enhancing the user experience.

A notable technology featured in this trimmer is the automatic line advance system. This system ensures that the cutting line is fed smoothly and consistently, reducing the need for manual adjustments and allowing for uninterrupted trimming. The line itself is designed for durability, providing longevity even when tackling dense vegetation.

The Weed Eater 952711937 also comes equipped with a versatile cutting head that can accommodate different types of line, enabling users to choose the best option based on their specific lawn care needs. This adaptability makes it suitable for both light trimming and heavy-duty weed clearance.

Customers appreciate the ease of maintenance that this model offers. With simple assembly and straightforward upkeep, the Weed Eater 952711937 is designed to ensure that users can quickly get back to their gardening tasks with minimal downtime.

In conclusion, the Weed Eater 952711937 is a robust and efficient trimmer that combines power, ease of use, and advanced technology. Its lightweight structure, powerful engine, and convenient features make it an ideal tool for anyone seeking to achieve a well-maintained yard. Whether you're a homeowner or a professional landscaper, this trimmer offers the reliability and performance needed to keep your outdoor spaces looking their best.