OPERATION
TO ATTACH GRASS CATCHER
1.Lift the rear door of the lawn mower and place the grass catcher frame side hooks onto the door pivot pins.
2.The grass catcher is secured to the lawn mower housing when the rear door is
lowered onto the grass catcher frame. 
CAUTION: Do not run your lawn mower without mulcher plug or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open.
Pivot pins | Rear door |
Grass catcher handle
Catcher frame hook
TO CONVERT MOWER
Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging:
•Open rear door and remove mulcher plug. Store mulcher plug in a safe place.
•You can now install grass catcher.
•To convert to mulching operation, install mulcher plug into rear discharge open- ing of mower.
CAUTION: Do not run your lawn mower without rear mulcher plug or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open.
TO EMPTY GRASS CATCHER |
| |
1. | Lift up on grass catcher using the |
|
| frame handle. |
|
2. | Remove grass catcher with clippings | Mulcher plug |
| from under lawn mower handle. | |
|
| |
3.Empty clippings from bag. NOTE: Do not drag the bag when emptying. It will cause unnecessary wear.
CAUTION: Under normal usage, the catcher material is subject to deterioration and wear and should, therefore, be checked frequently for replacement. Any replacement catcher should be checked to ensure compliance with original manufacturer's specifi cations.
Grass catcher 
frame handle
Bag handle
10