HOW to USE Your Lawn Mower, To Start, To Stop

OPERATION

The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask worn over spectacles.

TO ADJUST CUTTING HEIGHT

Adjust cutting height to suit your require- ments. Medium position is best for most lawns. Raise wheels for low cut and lower wheels for high cut. All four wheels are

TO CONVERT MOWER

Your lawn mower was shipped ready to be used as a mulcher. To convert to side discharging:

• Open mulcher door and install discharge

HOW TO USE YOUR LAWN MOWER

• Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start

and operate the lawn mower.

TO START

•Press the start button.

•Hold down operator presence control bar to handle.

•Mower will begin to operate.

adjusted by a single lever.

•Pull adjuster lever toward wheel. To lower mower, move lever forward to desired position. To raise mower, move the lever toward the rear.

deﬂector under door as shown.

• Mower is now ready for discharging

operation.

• To convert to mulching operation, dis-

charge deﬂector must be removed and

mulcher door must be closed.

CAUTION: Federal regulations require a motor control to be installed on this lawn mower in order to minimize the risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade turns when the motor is running.

EXTENSION CORD RETAINER

This lawn mower is equipped with a cord retainer in order to prevent the extension cord from disconnecting from the power cord while the mower is in use. The cord retainer hangs from the cord guide bar.

NOTE: Do not plug the extension cord into the outlet until it has been connected to the cord retainer and plugged into the mower.

•Fold the extension cord in order to form a tight loop near the retainer.

•Push the loop through the hole in the retainer.

•Slide the loop over the retaining clip, and pull down until the cord is secured.

TO STOP

•To stop motor, release operator pres- ence control bar.

Let the blade come to a complete stop.

CIRCUIT BREAKER

This mower is equipped with a circuit breaker in order to protect the supply circuit from short-circuit overloads.

FOLLOW THESE STEPS IF THE CIRCUIT BREAKER POPS OUT:

•Release the operator presence control bar and allow the mower to stop and cool down for 5 minutes.

•After the mower has cooled down, press the circuit breaker in order to reset it. Resume operation.

FOLLOW THESE STEPS IF THE CIRCUIT BREAKER POPS OUT AGAIN SHORTLY AFTER THE FIRST TIME:

•Release the operator presence control bar and allow the mower to stop and cool down for 15 to 30 minutes.

•After the mower has cooled down, press the circuit breaker in order to reset it.

Resume operation.

If the circuit breaker does not stay in, or if it continues to pop out during operation, contact the Toll-Free Helpline at 1-800- 849-1297.

Height adjuster lever

LEVER

BACKWARD

TO RAISEOpen mulcher door

MOWER

Discharge deﬂector

LEVER

FORWARD

TO LOWER

MOWER

WE18C specifications

The Weed Eater WE18C is a versatile and efficient string trimmer designed to tackle even the most challenging landscaping tasks. This lightweight and user-friendly tool is ideal for homeowners and garden enthusiasts seeking to maintain their lawns and gardens with ease. Its robust design, combined with practical features, makes the weed eater a popular choice for many.

One of the standout features of the WE18C is its 18-volt battery system. This cordless design offers the freedom of movement without the hassle of tangled cords or the limitations of gas-powered models. The rechargeable lithium-ion battery provides ample power for extended trimming sessions, allowing users to complete their tasks efficiently. The battery is designed for quick charging, enabling users to get back to work in no time.

The WE18C incorporates a performance-driven electric motor that delivers consistent power and eliminates the noise associated with gas trimmers. This makes it not only environmentally friendly but also perfect for residential areas where noise restrictions may apply. The trimmer's lightweight construction, weighing in at just around 5 pounds, ensures that it is easy to maneuver, reducing fatigue during prolonged use.

The trimmer features a 12-inch cutting width, which strikes a balance between maneuverability and efficiency. Its adjustable telescoping shaft allows users to tailor the height according to their preference, improving comfort during use. Additionally, the adjustable head allows for easy switching between trimming and edging tasks, making it a versatile tool for all your landscaping needs.

Another notable characteristic of the Weed Eater WE18C is its easy-to-use line feed system. The automatic spool system competently advances the line as needed, ensuring a continuous cutting experience without the hassle of manually adjusting the line. This feature allows users to focus on the task at hand without frequent interruptions.

Durability is another essential aspect of the WE18C’s design. Constructed with high-quality materials, this trimmer can withstand everyday wear and tear, positioning it as a reliable option for regular lawn maintenance. The combination of its efficient battery technology, lightweight design, and user-friendly features makes the Weed Eater WE18C an excellent investment for anyone looking to enhance their landscaping efforts.