Weed Eater 530163804 instruction manual Seasonal Storage, Fuel System, Engine, Other

Page 9

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy stor- age.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or fuel storage container. Follow the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through

the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom- mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to

another.

SReplace your gasoline can if it starts to rust.

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing any of the recommended remedies below other than remedies that require operation of the unit.

TROUBLE

 

CAUSE

REMEDY

Engine will not

1.

Engine flooded.

1. See “Starting a Flooded Engine”

start.

 

 

in Operation section.

 

2.

Fuel tank empty.

2. Fill tank with correct fuel mixture.

 

3.

Spark plug not firing.

3. Install new spark plug.

 

4.

Fuel not reaching

4. Check for dirty fuel filter; replace.

 

 

carburetor.

Check for kinked or split fuel line;

 

 

 

repair or replace.

 

5.

Compression low.

5. Contact an authorized service dealer.

Engine will not

1.

Fuel not reaching

1. Check for dirty fuel filter; replace.

idle properly.

 

carburetor.

Check for kinked or split fuel line;

 

 

repair or replace.

 

2.

Carburetor requires

 

2. Contact an authorized service dealer.

 

 

adjustment.

 

 

3.

Crankshaft seals worn.

3. Contact an authorized service dealer

 

4.

Compression low.

4. Contact an authorized service dealer.

Engine will not

1. Air filter dirty.

1. Clean or replace air filter.

accelerate,

2. Fuel not reaching

2. Check for dirty fuel filter; replace.

lacks power, or

 

carburetor.

Check for kinked or split fuel line;

dies under a

 

 

repair or replace.

3. Spark plug fouled.

3. Clean or replace spark plug

load.

 

 

and re-gap.

 

 

 

 

4. Carburetor requires

4. Contact an authorized service dealer.

 

 

adjustment.

5. Contact an authorized service dealer.

 

5. Carbon build up.

 

6. Compression low.

6. Contact an authorized service dealer.

Engine smokes

1. Choke partially on.

1. Adjust choke.

excessively.

2. Fuel mixture incorrect.

2. Empty fuel tank and refill with

 

3. Air filter dirty.

correct fuel mixture.

 

3. Clean or replace air filter.

 

4. Carburetor requires

4. Contact an authorized service dealer.

 

 

adjustment.

 

Engine runs hot.

1. Fuel mixture incorrect.

1. See “Fueling Engine” in Operation

 

 

 

section.

 

2. Spark plug incorrect.

2. Replace with correct spark plug.

 

3. Carburetor requires

3. Contact an authorized service dealer.

 

 

adjustment.

4. Contact an authorized service dealer.

 

4. Carbon build up.

-- 9 --

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Know Your UnitHandle Fuel with CAUTION, IT is Highly Flammable Operate Your Unit SafelyVacuum BAG Assembly Blower Tube AssemblyMaintain Your Unit Properly HOW to Convert Unit from Vacuum USE to Blower USE Vacuum Tube AssemblyElbow Tube Small VacuumKnow Your Blower Shoulder Strap AdjustmentThrottle Lever Primer ButtonOperating Tips Operating PositionBefore Starting Engine Fueling Engine To Stop the EngineStarting a Warm Engine Starting a Cold EngineStarting a Flooded Engine General RecommendationsClean AIR Filter Inspect and Clean Unit and DecalsCarburetor Adjustment Replace Fuel FilterSeasonal Storage Troubleshooting Table Cause RemedyFuel System EngineElectrolux Home PRODUCTS, INC Emission Control Warranty Parts

530163804 specifications

The Weed Eater 530163804 is a versatile and efficient tool designed for both the casual gardener and the dedicated landscaping professional. Renowned for its reliability and performance, this weed eater has earned a place in the arsenal of those who prioritize lawn care.

One of the standout features of the Weed Eater 530163804 is its lightweight design, making it easy to maneuver around various terrains. Weighing in at just a few pounds, this tool minimizes fatigue during extended use, allowing users to tackle larger areas without feeling overworked.

Powered by a robust 2-cycle engine, the Weed Eater 530163804 delivers ample power for cutting through dense weeds and grass. The engine's efficient design not only provides high performance but also ensures that fuel consumption remains economical. This combination of power and efficiency makes it a reliable choice for both home use and professional landscaping needs.

The weed eater features an automatic line feed system, which simplifies the process of reloading the cutting line. This technology automatically advances the line as needed, eliminating interruptions during trimming sessions. Users can focus on their tasks without the hassle of manually adjusting the string, saving both time and effort.

Another key characteristic is the adjustable handle, which allows for a customizable grip to suit the user's comfort and working style. This ergonomic feature is particularly beneficial for individuals who spend extensive time using the tool, as it helps reduce strain on the hands and wrists.

Additionally, the Weed Eater 530163804 comes equipped with a durable cutting head designed to withstand rigorous use. Its ability to accept various trimmer lines ensures versatility in handling different types of vegetation, making it ideal for tackling a range of tasks, from light trimming to heavy-duty clearing.

Overall, the Weed Eater 530163804 stands out for its combination of power, lightweight design, and user-friendly features. Ideal for gardeners and landscapers alike, it represents a practical investment for anyone looking to maintain a clean and attractive outdoor space. With its advanced technologies and features, it continues to be a popular choice among outdoor enthusiasts.
Top Page Image Contents