Weed Eater 530086930 instruction manual Cutting Safety, Transporting and Storage, Attaching Shield

Page 3

CUTTING SAFETY

WARNING: Inspect the area before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line. Hard objects can damage the trimmer head and be thrown causing serious injury.

SUse only for trimming, scalping, mowing, edg- ing and sweeping. Do not use for pruning or

hedge trimming.

SKeep firm footing and balance. Do not over-

reach.

SKeep all parts of your body away from muffler and spinning line. Keep engine below waist level. A hot muffler can cause serious burns.

SCut from your right to your left. Cutting on left side of the shield will throw debris away from

the operator.

SUse only in daylight or good artificial light. S Use only for jobs explained in this manual.

TRANSPORTING AND STORAGE

S Allow engine to cool; secure unit before stor- ing or transporting in vehicle.

S Empty the fuel tank before storing or trans- porting the unit. Use up fuel left in the carbure- tor by starting the engine and letting it run until it stops.

S Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from wa- ter heaters, electric motors or switches, fur- naces, etc.

S Store unit so line limiter blade cannot acciden- tally cause injury. The unit can be hung by the tube.

S Store unit out of reach of children.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or ab- normal swellings. Prolonged use in cold weather has been linked to blood vessel dam- age in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek med- ical attention. An anti--vibration system does not guarantee the avoidance of these prob- lems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condi- tion of this tool.

SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark arresting screen which meets the require- ments of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Ore- gon, and Washington require by law that many internal combustion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations ex- ist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. For normal homeowner use, the muffler and spark arrest- ing screen will not require any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your autho- rized service dealer.

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

ATTACHING THE ASSIST HANDLE NOTE: Be sure to attach the assist handle to the unit before attaching the shield.

1.Assemble handle to the unit as shown; make sure bottom of handle is seated in the groove in the trigger housing.

NOTE: Knob must be assembled on the right hand side of the unit as shown in the il- lustration.

2.Make sure the bolt is seated in the hex-- shaped hole in the handle.

3.Pivot the handle to a comfortable position.

4.Tighten knob securely.

ATTACHING SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you.

For proper orientation of shield, see KNOW YOUR TRIMMER illustration in OPERATION section.

Groove

3

Image 3
Contents Manual de Instrucciones Manuel d’Instructions Operator Safety Unit / Maintenance SafetyFuel Safety Cutting Safety Transporting and StorageAttaching Shield Before Starting Engine ON/STOP Switch ChokeKnow Your Trimmer Primer BulbStarting a Flooded Engine HOW to Stop Your UnitHOW to Start Your Unit Starting a Warm EngineCutting Methods Operating PositionTwist and Edge Trimmer Line AdvanceFasteners and Parts Clean AIR FilterInspect and Clean Unit Check for LooseFuel System Line ReplacementCarburetor Adjustment Seasonal StorageTroubleshooting Table Cause Remedy

530086930 specifications

The Weed Eater 530086930 is a powerful and reliable tool designed for homeowners and landscaping professionals seeking efficiency in lawn maintenance. This product stands out in the realm of string trimmers, offering features that cater to both ease of use and performance.

One of the main features of the Weed Eater 530086930 is its lightweight design, making it easy for users to maneuver while trimming hard-to-reach areas. Weighing just around 10 lbs, this trimmer reduces fatigue, allowing users to work for extended periods without discomfort. The adjustable handle further enhances its ergonomic design, accommodating various user heights and preferences.

The Weed Eater 530086930 utilizes a gas-powered engine that delivers robust performance, ensuring that tough weeds and grass are tackled with ease. This trimmer is equipped with a 2-cycle engine, which is known for its reliability and power output. The engine is designed for efficient fuel consumption, enabling longer operation times between refuels, thus increasing productivity in yard care tasks.

A standout feature of the Weed Eater 530086930 is its automatic line advance system. This technology ensures that the cutting line is fed seamlessly, preventing downtime caused by line adjustments. The system is both user-friendly and efficient, allowing for uninterrupted trimming.

Another significant characteristic is the versatile cutting ability. The Weed Eater 530086930 can effectively transition between trimming and edging tasks. It features a pivoting head that rotates easily, allowing users to switch angles seamlessly for different tasks. This versatility makes it an ideal choice for maintaining borders, flower beds, and tight corners.

Durability is also at the forefront of the Weed Eater 530086930's design. The trimmer is constructed with rugged materials that can withstand the demands of regular use, ensuring longevity. Additionally, the replacement parts are readily available, making maintenance and repairs straightforward.

In summary, the Weed Eater 530086930 combines lightweight design, powerful engine performance, user-friendly technologies, and durability. These characteristics make it a valuable tool in any lawn care regimen, appealing to both casual users and serious landscaping enthusiasts. Whether you are trimming overgrown areas or maintaining neat edges, the Weed Eater 530086930 is engineered to deliver reliable, efficient, and effective results.