Whirlwind SAT-1 warranty Thru, XLR Pinout

99 Ling Rd

Rochester, NY 14612

585 663-8820 Fax 585 865-8930

SAT-1

Satellite Module and

Headphone Breakout Box

		L	1
		R
		SAT-1
		SATELLITE
		MODULE
		STEREO
3	PHONES		PHONES
			2
		MONO
	1		2

1:Volume Controls Provides separate left/right volume control. When used in conjunction with the Stereo/Mono switch, you can achieve a “mix” between channels.

2:Headphone Outputs

Two outputs are provided for each of the two sections on the Satellite module. Each set is wired in parallel.

3:Stereo/Mono Switches One switch is supplied for each section of the SAT-1

4: IN

Input to Satellite Module. Standard XLR jack is provided so that hookup can be accomplished with standard microphone cables.

5: THRU

Wired parallel to the input jack, can be used for “Daisy Chaining” modules.

XLR PINOUT

Pin 1 = shield

Pin 2 = ring (right)

Pin 3 = tip (left)

IN	THRU
4	5

When using headphone impedances of 50 ohms or less, do

!not power the SAT-1 with an amplifier rated greater than 45 watts. Failure to observe this will burn out the current limiting

resistors inside the unit and void the warranty.

Optional Equipment: PCHLIP for mounting SAT-1 on a

microphone stand. Available at authorized Whirlwind dealers.