Sears 536.79751 Operation, Rotating BLADE. the Blade can, Cause Injury, Fill/Add Oil, Fill GAS

Page 9

©

OPERATION

The operation of this edger can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating the edger.

We recommend standard safety gtasses or Wide Vision Safety Mask for over your glasses

Fill the fuel tank (See Fig 7) wilh clean, fresh, unleaded

CAUTION: KEEP AWAY FROM THE

grade automotive gasoline. Be sure that the container

ROTATING BLADE. THE BLADE CAN

you pour the gasoline from is clean and free from dust or

CAUSE INJURY.

other foreign particles. Never use gasoline that may be

 

 

stale from long periods of storage in the container

FILL/ADD OIL:

The engine on this edger was shipped with little or no oil. Add oil before you start the engine, Place the edger on a level surface Remove the oil fill cap (Fig 7). Fill the engine crankcase to point of overflowing using about 2I ounces (1_It4 pts) of Sears SAE !0W-30 motor oil or equivalent Reinstall the oil fill cap

FILL GAS:

Never use engine or carburetor cleaner products in the fuel tank or permanenl damage that may occur.

FUEL FILL CAP

, ,,

,, ,,,,

.b

AND CAUTION MUST BE USED WHEN CAUTION: GASOLINE tS FLAMMABLE HANDLING OR STORING IT. DO NOT

FILL FUEL TANK WHILE EDGER IS RUNNING, HOT, OR WHEN EDGER IS IN AN ENCLOSED AREA_ KEEP AWAY FROM OPEN FLAME, ELEC- TRICAL SPARK, AND DO NOT SMOKE WHILE FILLING THE FUEL TANK. NEVER FILL FUEL TANK COMPLETELY; BUT FILL THE TANK TO WITHIN 1/4 - 1/2 INCH FROM THE TOP TO PRO-

VIDE SPACE FOR EXPANSION OF FUEL. AL- WAYS FILL FUELTANK OUTDOORS AND USE A FUNNEL OR SPOUT TO PREVENT SPILLING° MAKE SURE TO WIPE UP ANY SPILLED FUEL BEFORE STARTING THE ENGINE.

STORE GASOLINE IN A CLEAN, APPROVED CONTAINER, AND KEEP THE CAP IN PLACE ON THE CONTAINER° KEEP GASOLINE IN A COOL, WELL VENTILATED PLACE; NEVER IN THE HOUSE. NEVER BUY MORE THAN A 30 DAY SUPPLY OF GASOLINE TO ASSURE VOLATIL- ITY GASOLINE IS INTENDED TO BE USED AS A

FUEL FOR INTERNAL COMBUSTION ENGINES; THEREFORE_ DO NOT USE GASOLINE FOR ANY OTHER PURPOSE. SINCE MANY CHILDREN LIK E THE SMELL OF GASOLINE, KEEP IT OUT OF THEIR REACH BECAUSE THE FUMES ARE DAN- GEROUS TO INHALE, AS WELL AS BEING EX- PLOSIVE.

OIL FiLL CAP

FIG. 7

CAUTION: NEVER FILL THE GAS TANK WHILE THE ENGINE IS RUNNING OR HOT. IMMEDIATELY WIPE OFF ANY SPILLED GASOLINE BEFORE ATTEMPTING TO START THE ENGINE.

Image 9
Contents Manual Operating Safety Fuel SafetyREPAIR1ADJUSTMENTS Safety Yolir Safety is InvolvedSafe Storage Customer Responsibilities Maintenance AgreementContents of Shipping Carton Tools Required for AssemblyCON Ents BLY AsseTo Assemble the Edger To Remove Edger from CartonAssembly Choke Control Clutch LeverRotating BLADE. the Blade can OperationCause Injury FILL/ADD OILPRE-USE Check of Controls Keep the Edger CleanTo Start the Engine Edging OperationFill in Dates AS YOU Complete Regular Service Service RecordCheck List Before Storage Beginning Each SeasonAIR Cleaner Maintenance Spar Plug MaintenanceTenance Possible User or Bystander Injury Blade ReplacementCarburetor Adjustment Making Adjustmentsthat Require Engine to be RUNNING, KeepING Away from ANY Moving Part Correction CauseEngine Storage StorageEdger Storage Edger Indoors or in AN EN CLOSED, Poorly Ventilated AreaEPA! PA Craftsman 9- 2.5 H.P. Edger 5 H.P. Edger 536.797510 CraftsmanPart Name Craftsman 9 2.5 H.P. EdgerCraftsman 4-CYCLE Engine Model 3OO Cycle Engine ModelCarburetor no Craftsman 4-CYCLEENGINE ModelEdger When Ordering Repair PARTS, AlwaysGive the Following Information Product Edger Part Number Part Description