HOW to Start Your Unit, Operating Position

Engine Choke Lever

ON/OFF

Switch

FULL HALF OFF

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

1.Set unit on a flat surface.

2.Move ON/OFF switch to the ON position.

3.Slowly press the primer bulb 6 times.

4.Move choke lever to the FULL CHOKE position.

5.Squeeze the throttle trigger fully and hold through all remaining steps.

Starter Handle

Choke

Lever

Muffler

Primer Bulb

9.Once the engine starts, allow it to run 10 seconds, then move the choke lever to the OFF CHOKE position. Allow the unit to run for 30 more seconds at OFF CHOKE before releasing the throttle trig- ger.

NOTE: If engine dies with the choke le- ver in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move ON/OFF switch to the ON position.

2.Move the choke lever to the HALF CHOKE position.

3.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the en- gine runs smoothly.

4.Pull starter rope sharply until engine runs, but no more than 5 pulls.

5.Allow engine to run 15 seconds, then move the choke lever to OFF CHOKE.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the OFF CHOKE position; then, pull the rope to clear the engine of ex- cess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded.

If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING INSTRUCTIONS

OPERATING POSITION

ALWAYS WEAR:

Eye Protection

Long Pants

Heavy Shoes

6.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

7.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

8.Pull starter rope sharply until engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the start- er rope until the engine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably flooded. Proceed to

STARTING A FLOODED ENGINE.

Cut from your right to your left.

WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

Do not run the engine at a higher speed than necessary. The cutting line will cut efficiently when the engine is run at less than full throttle. At lower speeds, there is less engine noise and vibration. The cutting line will last longer and will be less likely to “weld” onto the spool.

Always release the throttle trigger and allow the engine to return to idle speed when not cutting. To stop engine:

SRelease the throttle trigger.

SMove the ON/OFF switch to the OFF posi- tion.

530163505 specifications

The Weed Eater 530163505 is an essential tool for gardeners and landscape enthusiasts who are looking to maintain a neat and tidy lawn. This efficient and reliable product is designed with a variety of features that ensure ease of use, durability, and optimal performance.

One of the standout features of the Weed Eater 530163505 is its powerful 25cc engine, which delivers ample cutting power for tackling tough weeds and overgrown grass. This engine is designed to provide consistent performance while minimizing emissions, making it an environmentally friendly choice for users. The lightweight construction of the unit ensures that it is easy to maneuver, reducing fatigue during prolonged use, which is particularly beneficial for larger properties or diverse garden areas.

The design of the Weed Eater 530163505 includes an adjustable handle, allowing users to find the most comfortable grip based on their height and preference. This ergonomic design not only enhances comfort but also improves control, helping users to navigate tight spaces and uneven terrain with ease.

Additionally, this model is equipped with an innovative string trimmer system that utilizes a dual-line feed. This feature allows for a wider cutting swath, effectively reducing the time needed to finish tasks. The automatic line advancement reduces interruptions during work, meaning users can focus more on trimming rather than constantly adjusting the line.

The Weed Eater 530163505 stands out in terms of its ease of maintenance. The air filter and spark plug are easily accessible, which allows for straightforward clean-up and servicing, ensuring that the trimmer maintains peak performance over time.

Another key characteristic is its ability to work efficiently in various conditions. Whether tackling thick grassy areas, invasive weeds, or fine trimming along garden edges, the Weed Eater 530163505 delivers versatility. Its durability is further backed by a robust construction that withstands the rigors of outdoor work.

In summary, the Weed Eater 530163505 combines a powerful engine, user-friendly design features, and efficient cutting technology to meet the demands of modern lawn care. Its lightweight design, adjustable handle, dual-line feed system, and ease of maintenance make it an excellent choice for both professional landscapers and weekend gardeners alike. Investing in this tool guarantees a well-kept garden with minimal hassle, ensuring your outdoor spaces always look their best.