Sears 917.249491 owner manual Use Hardware - Group a, Support Post See Fig Use Hardware - Group B

Page 7

1 REAR MOUNTING BRACKET

(See Figs. 1 & 2)

Use Hardware - - GROUP "A"

Only one set of hardware in GROUP "B" will be used to mount the rear mounting bracket. To determine which set is correct for your tractor, check to see if there are (2) two upper corner ribs on each side of drawbar, tf your tractor has the upper corner ribs, use the (4) four self tapping bolts If your tractor does not have the corner ribs, use the set of

(4)four bolts and Iocknuts

SELF TAPPING BOLTS

Assemble the mounting bracket, lanced tabs towards bottom, using the four formed holes on the drawbar

NOTE: Start the self tapping bolts into holes on the drawbar at least two full turns and remove. This will make it

much it much easier to fasten the bolts once the mounting bracket is in place

=Install the four bolts as shown and tighten securely

 

UPPER CORNER

UPPER CORNER

RIBS

 

RIBS

 

SELF

TAPPING

BOLTS

Fig. 1

BOLTS AND LOCKNI, JTS

=Assemble the mounting bracket, lanced tabs towards bottom, using the four smaller inside holes on the drawbar,

Install the four bolts and Iocknuts as shown and tighten securely

BOLTS

LOCKNUTS

LANCED TABS TOWARD BOTTOM

BLY

COVER SEAL (See Fig. 3)

No hardware required

Align mark on seal with mark at cover opening

Work seal into opening so cover sits between flanges of seal

ALIGNMENT

MARKS

COVER SEAL

Fig. 3

SUPPORT POST (See Fig. 4)

Use Hardware - - GROUP "B"

 

loaded and locked to the cover. Handle

 

 

cover assembly carefully so as not to

 

I_

unlatch the cover from the container

I

CAUTION: Container support is spring

 

support.

 

Rotate cover assembly onto its side as shown.

Assemble support post to container support with the three (3) hex bolts and Iocknuts. Tighten securely_

HEX BOLTS

SUPPORT

POST

/•

/

/

/LOCKNUTS

Fig. 4

Fig. 2

7

Image 7
Contents £nRFT MRll IL Slope Operation Safety is InvolvedTransporting, adjusting or making repairs Safe Operation Practices for Ride-On MowersTable of Contents TO11111111t111111111111 To-4q%1o o Assembly No hardware required Use Hardware - Group aSupport Post See Fig Use Hardware - Group B Bolts and LOCKNI, JTSMounting to Tractor See Use Hardware - Group C Container Assembly See Fig No hardware requiredWith OUT Gage Wheels Deflector Container Mounting See FigLevel Mower Deck Use Hardware - Group E & FOperation For ImprovedDepress clutch brake pedal fully and set parking brake General RecommendationsStorage MentsPage Repair Parts Tie, Cable KEY Part NO. no DescriptionLocknut 5/16 Model Number ING Information = PRODUCT- Grass CatcherPart Number Part Description

917.249491 specifications

The Sears 917.249491 is a versatile and efficient lawn mower that has gained popularity among homeowners and gardening enthusiasts. This mower combines robust engineering with user-friendly features, making it a delightful choice for maintaining a well-manicured lawn.

One of the standout characteristics of the Sears 917.249491 is its powerful engine. Equipped with a reliable four-stroke engine, the mower delivers ample power to tackle tough grass and uneven terrain. This engine not only ensures optimum performance but also promotes fuel efficiency, which is a great advantage for users concerned about gasoline costs and environmental impact.

The cutting deck of the 917.249491 measures a generous 21 inches, allowing it to cover more ground in less time. This size strikes an ideal balance between efficiency and maneuverability, able to navigate through garden pathways and around landscaping features without difficulty. Additionally, the cutting height can be easily adjusted, providing users with flexibility to achieve the desired lawn look—whether it is a close cut or slightly longer grass for a healthier yard.

Designed for convenience, the Sears 917.249491 comes with a self-propelled feature. This technology enables users to maintain a steady pace without requiring them to exert additional physical effort. The adjustable speed control allows users to customize their mowing speed according to personal preference and lawn conditions, making it a suitable option for various users, from beginners to seasoned lawn care aficionados.

Another notable aspect of the 917.249491 is its easy-start functionality. The mower is designed to minimize starting difficulties, providing ease of use right from the outset. This feature is especially beneficial for those who may struggle with traditional pull-start mechanisms.

Furthermore, the mower’s ergonomic handle design improves comfort during operation, reducing fatigue over extended periods of use. The foldable handlebar is a fantastic addition, promoting easy storage while saving valuable space in sheds or garages.

Overall, the Sears 917.249491 combines power, efficiency, and user-friendly features to create an exceptional lawn mowing experience. With its robust engine, self-propelled capabilities, and easy-start technology, it stands out as a reliable choice for those looking to maintain their lawns effortlessly while achieving professional results.