Sears 917.38783, 143.974506 To Remove Lawn Mower from Carton, HOW to SET U P YOU R Lawn Mower

Page 6

Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower. Your'new lawn mower has been assembled at the

factory with the exception of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc. necessary to complete the assembly have been placed in the parts bag, To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.

TO REMOVE LAWN MOWER FROM CARTON

oRemove loose parts included with mower.

oCut down two end corners of carton and lay end panel down flaL

oRemove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle.

oRoll lawn mower out of carton and check carton thor- ougHy for additional loose parts_

HOW TO SET U P YOU R LAWN MOWER

TO UNFOLD HANDLE (See Fig. 1)

IMPORTANT: UNFOLD HANDLES CAREFULLY SO AS NOT TO PINCH OR DAMAGE CONTROL CABLES.

Raise handles until lower handle section locks into place in mowing position,.

.

Raise upper handle section into place on lower handle,

 

remove protective padding and tighten both handle

 

knobs..

,,Remove handle padding holding operator presence control bar to upper handle.

oYour lawn mower handle can be adjusted for'your mowing comfort° Refer to "Adjust Handle" in the Service and Adjustment section of this manual,

OPERATOR PRESENCE

CONTROLBAR

UPPER HANDLE

LIFT UP

MOWING POSITION

LOWER HANDLE

FIG. t

LY

TO INSTALL ATTACHMENTS

(See Fig. 2)

Your' lawn mower was shipped ready to be used as a mulcher, To convert to bagging or discharging:

oOpen rear door' and remove mulcher plug, Store mulcher plug in a safe place,

°You can now install catcher or optional clipping deflec- tor.

oTo return to mulching operation, install mulcher plug into discharge opening of mower,.

MULCHER PLUG

FIG. 2

CAUTION: Do not run your lawn mower without mulcher plug in place or ap- proved clipping deflector or grass

catcher in place, Never'attempt to op- erate the lawn mower with the rear door

removed or'propped open.

6

Image 6
Contents Model REV2 VBLTraining PreparationProduct Specifications Maintenance AgreementCustomer Responsibilities TA LE of Contents Lawn E Accessories MaintenanceTo Remove Lawn Mower from Carton HOW to SET U P YOU R Lawn MowerTo Install Attachments To Unfold Handle See FigFIG, 3C To Assemble and Attach GrassCatcher See Figs a thru FIG, 3AMeets Cpsc Safety Requirements Know Your Lawn MowerEngine Speed HOW to USE Your Lawn MowerBefore Starting Engine Engine Zone ControlTo Start Engine Mowing TipsBefore Each USE Lubrication ChartCusto ER Responsib L Tues LubricationTo Sharpen Blade TiresBlade Care Grass CatcherAIR Filter CleaningLubrication MufflerRear Deflector To Adjust Cutting HeightEngine CarburetorHandle See Fig StorageLawn Mower Fuel SystemLLI === =N MODELNUMBER143.974506 KEY Part NO. no Description MCRKEY Part Description NO. no DescriptionPart Description Troubleshooting Points ProblemCause Correction For Repair SERVICE, Call this Toll Free Number Owne S UALEngine Craftsman Model no Part Number Part Description