Numark Industries Troubleshooting Solutions for Your LLC Stereo System

Page 15

Problem

Cause?

Solution

 

 

 

 

Turntable does not turn on.

Disconnected Power Cord?

Connect Power Cord.

 

 

 

 

The sound level is very low.

The Turntable is not connected to a

Connect the device to a preamp DJ

 

device with a PHONO preamp.

mixer or an AV receiver that has an

 

 

input labeled PHONO, not AUX or

 

 

LINE.

 

 

 

 

The sound is on one side only.

The Cartridge is not properly wired.

Reconnect the wires from the

 

 

headshell to the cartridge. See the

 

 

"Cartridge Setup" section for more

 

 

detail.

 

The Stylus is worn out.

Replace the stylus on the cartridge.

 

 

Replacement styli are available

 

 

from most Numark Retailers.

 

The RCA audio cord is

Properly secure the RCA cable to

 

disconnected.

the preamp device and the bottom

 

 

of the turntable. See the "Cable

 

 

Connections" section for more

 

 

detail.

 

The RCA audio cord is damaged.

If the RCA cord is frequently

 

 

connected and disconnected, it

 

 

may have become damaged and

 

 

needs to be replaced.

 

 

 

 

The output sound is very distorted.

The Cartridge is not properly wired.

Reconnect the wires from the

 

 

headshell to the cartridge. See the

 

 

"Cartridge Setup" section for more

 

 

detail.

 

The Stylus is worn out.

Replace the stylus on the cartridge.

 

 

Replacement styli are available

 

 

from most Numark Retailers.

 

 

 

 

The Output sound exhibits

The Turntable Grounding wires are

Connect the Turntable Ground

excessive hum or buzzing.

not connected.

wires to their respective Grounding

 

 

Lug on all equipment (mixer, etc.)

 

 

 

 

The turntable skips like crazy.

The Turntable is on an unstable

Follow the guidelines for installation

 

surface.

in the "Setup & Installation"

 

 

Section.

 

The Tone Arm is not balanced

Follow the guidelines for optimum

 

properly.

setup in the "Tone Arm Setup"

 

 

Section.

 

The Stylus is worn out.

Replace the stylus on the cartridge.

 

 

Replacement styli are available

 

 

from most Numark Retailers.

 

Excessive force is being applied

Reread the "Operation" section of

 

directly down on the platter.

this manual.

The record is warped.

Buy new records.

NOTE:

Static electricity and/or other external interference may cause this unit to malfunction. To reset the unit to its normal condition, turn the power off and then on again. If the problem continues to persist, refer to the connected component's troubleshooting guides. If the problem is not resolved after checking these items, contact the nearest authorized Numark dealer.

TROUBLE SHOOTING

PAGE 14

Image 15
Contents Cartrdige Slipmat Inside the BOXSafety Precautions Table of Contents General Controls ControlsBottom Parts Tone Arm PartsSetup & Installation Setup Style 1 traditionalSetup Style 2 battle style, scratching Platter Setup Cable Setup Tone ARM Setup Setting the Anti-Skate AdjustmentBalancing the Tone Arm For Head Shell Mounted Cartridges Cartridge SetupOperation Limited Product Warranty Return Information US only Turntable Section SpecificationsProblem

TT-1650 specifications

Numark Industries has long been a key player in the music equipment industry, particularly in the realm of turntables. One of their noteworthy offerings is the TT-1650, a direct-drive turntable that captures the attention of DJs and audiophiles alike. Designed with performance and user-friendliness in mind, the TT-1650 delivers a range of features that cater to both beginners and seasoned vinyl enthusiasts.

The standout feature of the TT-1650 is its direct-drive motor, which provides consistent torque and remarkable playback stability. This means that users can expect precise speed control, whether for mixing or simply enjoying their favorite records. The turntable operates at standard speeds of 33 1/3 and 45 RPM, ensuring compatibility with a wide range of vinyl formats.

Another impressive characteristic of the TT-1650 is its S-shaped tonearm. This design not only enhances tracking accuracy but also reduces distortion, allowing for a richer and more detailed sound experience. The tonearm is equipped with adjustable anti-skate control, which helps maintain optimal performance by countering any lateral movement of the stylus during playback.

One of the most user-friendly aspects of the TT-1650 is its built-in phono preamp, eliminating the need for an external setup. This feature simplifies connectivity to a variety of audio systems, making it an ideal choice for users who may not have extensive audio knowledge. Additionally, the turntable comes with RCA output cables, allowing for seamless integration into existing home audio setups.

With a sleek and modern design, the TT-1650 is both aesthetically pleasing and functional. Its robust construction ensures durability, while the slipmat provides a smooth surface for manipulating records, catering especially to DJs who may engage in turntablism techniques.

The Numark Industries TT-1650 offers a complete package for anyone looking to explore the world of vinyl. Its blend of modern technology and classic design principles makes it an enticing option for those wanting to bring warmth and authenticity back into their music experience. Whether for casual listening or serious mixing, the TT-1650 stands out as a formidable choice in the vast landscape of turntables.