Nilfisk-ALTO AMX-140FX Peak LED, Power LED, Phantom LED, 2TK to Ctrl Room, 2TK to MIX

Page 12

In the AMX-140FX model, excluding sending out directly to the external effect or processor equipment, the AUX SEND2 will also be sent to the internal onboard effect module.

4.8 PAN/BAL Control

11

Abbreviation of PANORAMA control for mono channels, for the stereo channels, always says, BALANCE control.

You can adjust the stereo image of the signal via this control. Keep this control in center position and your signal will be positioned in the middle of stage. Turn this control fully counterclockwise and the signal will be present only on the left speaker and vice-versa.

4.9 PEAK LED

12

Inside your AMX-140(FX) the audio signal is monitored in several different stages and then sent to the PEAK LED. When this LED blinks, it warns you that you are reaching signal saturation and possible distortion. The PEAK LED will blink with a level that is 6dB before actual clipping.

4.10 LEVEL Control

13

This control will adjust the overall level of this channel and set the amount of signal sent to the main output.

4.11 MAIN MIX LEVEL Dial

14

21

20

 

 

This control sets the amount of signal sent either to the main out socket or to the tape output.

4.12 OUTPUT LEVEL LED Display

15

This stereo 12 segments LED meter will indicate the level of the overall output signal.

- 8

MAX

PHONES /CTRL ROOM

-

8

MAX

2TK IN

2TK TO

CTRL ROOM

2TK TO MIX

TAPE

18

19

OUTPUT LEVEL

4.13 POWER LED

16

 

 

-7-4 -2 0 2

4

 

 

L

 

 

 

-10

7

 

 

 

-30 -20

 

 

10

 

This LED indicates when the power is on in your

 

 

 

 

CLIP

AMX-140(FX).

 

 

 

PWR

PH

 

 

R

 

 

 

 

 

 

 

15

16

4.14 PHANTOM LED

17

This LED indicates when the phantom power is switched on.

4.15 TAPE Switches

 

- 2TK TO CTRL ROOM

18

Engaging this button to route the 2 TRACK IN signal into the control room output.

- 2TK TO MIX

19

Engaging this button to route the 2 TRACK IN signal into the main output.

-

8

+15

MAIN MIX LEVEL

14

17

11

Image 12
Contents AMX-140FX/ AMX-140 Safety Related Symbols Important Safety InstructionsPower Supply External ConnectionPreface Table of Contents Introduction Features Ready to START? Control Elements AMX-140FXAMX-140 Input Level Setting LOW CUT SwitchMono MIC/LINE Channels Mono Channel InsertStereo Inputs 3 Bands Equalizer Controls1 HI 2 MIDPower LED Peak LEDPhantom LED 2TK to Ctrl RoomPhones DFX Footswitch TapeTape OUT Main MIX Output Connectors Power ON/OFF SwitchPhantom ON/OFF Switch AC Input ConnectorInstallation and Connection Some Final Tips on Wiring Configuration Stereo TRS Jack PlugTapped Connection Direct Output Lead For the Experts WHO Want to Know More Modification on mono and stereo channelsVOCAL1 VOCAL2Large Hall Small Hall Large RoomSmall Room PlateTape Reverb Mono Delay Spring ReverbStereo Delay FlangerChorus REVERB+DELAY REVERB+FLANGERREVERB+CHORUS System Block Diagrams TrackTechnical Specification Power supply AC/AC Adaptor PhysicalWarranty Warranty Registration CardReturn Notice Terms and ConditionsSeikaku Technical Group Limited

AMX-140FX, AMX-140 specifications

Nilfisk-ALTO has long been recognized for its commitment to delivering high-quality cleaning solutions, and the AMX-140 and AMX-140FX models are no exception. These powerful pressure washers are designed to tackle a wide range of cleaning tasks, providing exceptional performance and efficiency for both professional and residential use.

The Nilfisk-ALTO AMX-140 and AMX-140FX feature robust and durable construction, ensuring longevity even in demanding environments. With a powerful 140 bar pressure output, these models provide effective cleaning power that makes quick work of dirt and grime on a variety of surfaces, including patios, driveways, and vehicles. The compact design allows for easy maneuverability, while the built-in wheels facilitate transportation and storage.

One of the standout features of the AMX-140 and AMX-140FX is their user-friendly operation. The ergonomic spray gun design minimizes operator fatigue, making it comfortable to use for extended periods. Additionally, a quick connect system allows for easy attachment and detachment of hoses and accessories, streamlining the cleaning process.

These models are equipped with a high-performance induction motor that not only enhances energy efficiency but also reduces operational noise, making them ideal for use in residential areas and noise-sensitive environments. The AMX-140FX variant takes this a step further by incorporating advanced features, including an integrated detergent tank for effortless application of cleaning agents, allowing users to tackle tough stains with ease.

Another notable characteristic is their versatility. Both models come with a range of accessories and nozzles that cater to various cleaning needs. The adjustable pressure settings provide flexibility, allowing users to switch between different cleaning tasks, from gentle washing of delicate surfaces to intense cleaning of stubborn dirt.

The compact size and lightweight design of the AMX-140 and AMX-140FX make them easy to store when not in use. With features such as onboard storage for hoses and accessories, users can keep everything organized and readily accessible.

In summary, the Nilfisk-ALTO AMX-140 and AMX-140FX pressure washers combine power, efficiency, and user-friendly features, making them essential tools for any cleaning arsenal. With their durable construction, advanced technologies, and versatility, these models are perfect for both personal and professional cleaning tasks, ensuring exceptional results with every use.