Replace with Supplied Clutch retainer | Sears 7600058 specification

STEP 8: Remove the hardware securing the transmission idler assembly to the underside of the unit. Remove the idler assembly.

STEP 9: Remove the nut securing the transmission idler pulley to the idler arm, and remove the pulley assembly. See Figure 4.

Note: Make careful note of the exact placement of the idler belt guide before removing hardware, as the belt guide must be in this same position upon reassembly. Incorrect place- ment of the belt guide can result in interference with the belt routing and damage to the belt and/or unit.

Remove and discard the two spacing washers located between the top of the idler pulley and the idler arm. See Figure 4.

STEP 10: Reinstall the modified pulley assembly onto the idler arm, while at the same time replacing the existing transmission belt with the transmission belt supplied in this kit. Secure with the nut removed in Step 9, and position the belt guide as shown in Figure 4. Tighten the hardware securely.

STEP 14: Remove the hardware securing the clutch retainer to the unit, and replace the existing clutch retainer with the clutch retainer supplied with this kit, securing it with the existing hardware. See Figure 5. Do not tighten the hardware yet.

Replace with

supplied

clutch retainer

FIGURE 3

STEP 15: Replace the clutch key and the electric clutch removed in Step 4 onto the engine shaft, making sure to insert the clutch retainer into the corresponding slot in the

Remove and discard these washers

Idler Pulley

Idler Arm (Removed from unit)

	1/16 - 1/8”
	clearance
Belt Guide
Positioning	Belt

FIGURE 4

clutch housing. Secure the clutch with the hex head cap screw supplied with this kit, fitted with the washers removed in Step 4. Tighten the hardware, torquing to 45-55 ft. lbs. (61.2-74.8 Nm.).

STEP 16: Tighten the clutch retainer hardware noted in Step 14, torquing to 24-36 ft. lbs. (32.4-48.6 Nm.)

STEP 17: Reconnect the electric clutch harness to the unit’s main wiring harness, and secure the clutch harness up against the clutch retainer with the supplied wire tie, as removed in Step 3.

STEP 18: Replace the mowing deck belt removed in Step 1 onto the electric clutch pulley. Refer to the unit’s Operator’s

STEP 11: Reinstall the idler assembly onto the underside of the unit with the hardware removed in Step 8. Tighten the hardware securely.

STEP 12: Install the new transmission belt onto the two transmission pulleys and the engine pulley, as removed in Step 6.

STEP 13: Replace the forward end of the transmission idler spring onto the shoulder bolt, as removed in Step 5.

Manual for instructions.

Assembly is complete.

INSTRUCTION No. 7101803 (I.R. 10/31/2007) TP 200-5303-IR-AT-SC

7600058 specifications

The Sears 7600058 is a notable appliance in the realm of home electronics, particularly recognized for its blend of convenience, efficiency, and technology. As a quintessential product designed for modern living, it embodies a range of features that cater to the diverse needs of households.

One of the standout features of the Sears 7600058 is its energy-efficient design, which not only reduces electricity consumption but also contributes to lower utility bills. The appliance is embedded with advanced energy-saving technologies, allowing it to operate effectively while minimizing its environmental impact. This makes it an excellent choice for eco-conscious consumers seeking to reduce their carbon footprint.

The appliance boasts a user-friendly interface that ensures seamless operation. Its intuitive controls provide easy access to various functions, enabling users to adjust settings effortlessly. This is particularly beneficial for families with varied preferences, as it allows customizable experiences tailored to specific needs.

In terms of capacity, the Sears 7600058 is designed to accommodate significant loads, making it a practical option for larger households. Whether handling laundry, food storage, or cooking tasks, this appliance provides ample space to manage daily chores with efficiency. Its robust construction ensures durability, allowing it to withstand the rigors of regular use while maintaining peak performance.

Another key aspect of the Sears 7600058 is its incorporation of innovative technologies. Features such as smart connectivity allow users to control the appliance remotely, providing flexibility in operation. Through a compatible app, users can monitor status, set schedules, and receive notifications, all from the convenience of their smartphones. This integration of technology into everyday appliances reflects a significant trend towards smart home automation.

Moreover, the Sears 7600058 is designed for quiet operation, ensuring that it functions effectively without causing disruption. This is an essential consideration for many households, as it allows for a peaceful living environment even during peak usage times.

Overall, the Sears 7600058 stands out as a modern appliance that combines efficiency, technology, and user-friendly features. Its energy-saving capabilities, ample capacity, and smart functionalities make it a valuable addition to any home. With its focus on convenience and sustainability, the Sears 7600058 exemplifies the evolving needs of consumers in today's fast-paced world.