McCulloch 63, HC60, HC70, 95390052200, 65 Fuel Mixture, Preparation of the Mixture, Filling the Tank

Page 8

Keep all parts of the body and clothing away from the blades during startup and while the engine is running.

Always work from a stable position on your feet.

Do not use the hedge trimmer while standing on a ladder or other unstable support.

When trimming tall hedges or bushes, use a stable, safe platform and stand in a stable posi- tion without the risk of losing your balance.

If you strike an object accidentally, switch off the engine immediately and examine the machine.

Make sure the grip and hand guard are in place during use of the machine.

When trimming or edging, keep the engine run- ning at high speed; these operations should not be carried out with the motor running at low speed.

Never lift the hedge trimmer above shoulder height when using it.

Always wait for the motor to idle before moving the machine from one section of the shrub or hedge to another.

Stop the engine when changing to another place or before examining the blades.

Before starting to cut again make sure your position is correct.

To reduce the fire hazard keep the engine and muffler free of twigs, leaves or excess lubricant.

Watch out for the sharp edges and hot part of the machine.

Prolonged use of the machine or other equip- ment expose the operator to vibrations that can cause the White Finger Syndrome (Syndrome of Raynaud). This could reduce the sensitivity of the hands in distinguishing different tempera- tures and cause a general numbness. The operator should therefore check the conditions of the hands and fingers if the machine is used continuously or regularly. If one of the symp- toms should appear, consult a doctor immedi- ately.

D. Fuel Mixture

CAUTION!

Do not smoke while refueling!

Open the cap on the tank by loosening it slowly.

Fill the tank in the open, far from flames or sparks.

Never add fuel in the tank when the engine is running or hot, (let the engine cool off before filling the tank) to avoid the risk of fire.

Avoid contact of the oil and fuel with the skin and eyes.

Fill the tank in a well-ventilated place.

Do not inhale the fumes of the fuel mixture. It is toxic.

Store the fuel mixture in suitable fuel con- tainers only.

PREPARATION OF THE MIXTURE

CAUTION!

Do not use any other type of fuel than the type recommended in this manual.

This machine is equipped with a two-stroke engine and should therefore be fueled with a mixture of unleaded gasoline (with a mini- mum octane rating = 90) and fully synthetic oil specific for two-speed engines that use unleaded gasoline in the proportions indi- cated in the table on the cover, fig. (D)

CAUTION! Control the specifications of the oil shown on the package; the use of

oil lacking the specifications expressly indicat- ed in this manual could cause serious damage to the engine!

To obtain the best mixture, pour the oil into an approved container first, followed by the gaso- line, and shake the container well (every time you take fuel out of it).

Be careful not to spill the gasoline.

The characteristics of the mixture tend to deteri- orate in time, so you should only prepare as much mixture as you are going to need.

FILLING THE TANK

CAUTION! The following precautions should be taken to reduce the fire hazard:

Always ensure there is adequate ventilation.

Do not smoke or take sources of heat or sparks near the fuel.

Refuel with the engine off.

Open the cap on the tank carefully to elimi- nate any excess pressure.

Do not take the cap off the tank with the engine running.

After fueling, close the cap tightly.

Fill the tank in a well-ventilated place.

Place the machine on a solid flat surface so that it cannot tip over, with the cap on the tank fac- ing upward.

ENGLISH - 4

Image 8
Contents Electrolux Group. The world’s No.1 choice Tivoli 65 / HG 65 / HT Page Πρσυνεπρ τεργ επιτδικαιώµατνα τρτις τελεπτ παναστεγαυτπρειδ General Description Safety precautionsKey to symbols English Safety Instructions Always USE Original Replacements and AccessoriesFilling the Tank Fuel MixturePreparation of the Mixture Fuel Storage Cutting procedureOnly for Models with Adjustable Handle Carburetor adjustment Starting and stopping the engineCold Engine Warm EngineRoutine Maintenance Troubleshooting table Environmental informationTechnical specifications Conformity certificate

249350, 63, 65, 95390000700, 95390000600 specifications

The McCulloch HC70, HC65, and the models 95390000600, 95390000700, and 249350 are part of the renowned McCulloch line of hedge trimmers, known for their exceptional performance and user-friendly technologies. These models combine power, precision, and comfort, making them ideal for both hobbyists and professional landscapers.

One of the standout features of these hedge trimmers is their robust engine performance. The HC70 and HC65 are equipped with a powerful two-stroke engine that delivers enough torque to handle tough trimming tasks. This means users can easily cut through dense hedges and shrubs without worrying about the tool stalling or losing power mid-cut. The 95390000600 and 95390000700 models also emphasize engine efficiency, providing reliable cutting power while maintaining lower fuel consumption.

Another key characteristic of these models is their dual-action blades, which offer a sharp, precise cut. The blades operate on a dual-action mechanism, reducing vibration and allowing for smooth operation. This feature not only enhances cutting efficiency but also minimizes fatigue during extended use, making it easier for users to achieve a clean and professional finish on their hedges.

Ergonomics is also a focal point in the design of the McCulloch hedge trimmers. With adjustable grips and lightweight constructions, these models ensure user comfort, reducing strain on the arms and shoulders. The HC70 and HC65, for example, come with a rotating rear handle that allows for greater maneuverability and ease of handling, especially in tight spaces or when working at different angles.

Safety features are prioritized in the design of these trimmers. They are outfitted with protective guards and features such as quick-stop technology, which helps ensure that the blades stop moving immediately when the trigger is released. This enhances safety, particularly for novice users or in residential settings where children and pets may be present.

Finally, McCulloch’s emphasis on durability is evident in the construction of these models. Designed to withstand wear and tear, the hedge trimmers feature high-quality materials that can endure the rigors of outdoor use, ensuring longevity and reducing the need for frequent replacements.

In conclusion, the McCulloch HC70, HC65, along with models 95390000600, 95390000700, and 249350, represent a top-tier choice for anyone looking to maintain their outdoor spaces efficiently and safely. With powerful engines, precision blades, ergonomic designs, and robust safety features, these hedge trimmers are an essential addition to any gardening toolkit.