2
•Insert the phillips head screws into the openings on both sides of the handle and tighten securely (do not over tighten) as shown in figure 3.
3
•For catalog number (79442, 51891) attach the handle and insert the threaded screw through the handle and housing as shown in figure 4.
4
•Insert the two screws into the holes shown in figure 5 and screw down. Do not over tighten.
5
•Screw on the plastic knob to tighten handle to unit (figure 6).
5
6
NOTE: The handle on the 79442, 51891 is adjustable to four different positions as shown figure 7. To move handle, unscrew plastic knob, position handle as desired and retighten knob.
7 |
WARNING: DO NOT OPERATE THE HEDGE TRIMMER WITHOUT THE BAIL HANDLEATTACHED.
ATTACHING EXTENSION CORD TO TRIMMER
WARNING: BE SURE HEDGE TRIMMER IS NOT LOCKED ON.
An extension cord retainer is built into the switch handle that prevents the tool from coming unplugged. To use this feature, simply double the extension cord about 8 inches (203 mm) from the end, and insert it into the slot in the bottom of the handle area. Hook the loop formed by doubling the cord over the tab, as shown in figure 8. Gently tug on the cord to insure that it is firmly retained in the trimmer’s handle. Plug the receptacle end of the extension cord into the plug blades in the trimmer (figure 8).
SAVE THESE INSTRUCTIONS FOR FUTURE USE.
8