McCulloch 281 instruction manual Seasonal Storage, Engine, Other, Porting

Page 13

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool before storing or trans-

porting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SEmpty fuel tank before storing or transport- ing the unit.

SStore unit and fuel well out of the reach of

children.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time: S Clean the entire unit before lengthy stor-

age.

SStore in a clean dry area.

SLightly oil external metal surfaces.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

SReplace your gasoline can if it starts to rust.

13

Image 13
Contents Betriebsanweisung Manuel D’INSTRUCTIONSManual DE Instrucciones 530165941 1/1/05Identification of Symbols Identification What is WHAT?Operator Safety Safety RulesUnit / Maintenance Safety Line Trimmer Safety Fuel SafetyEdger Safety BLOWER/VACUUM SafetyCultivator Safety Brushcutter SafetyProper air flow StartingPole Pruner Safety Hedge Trimmer SafetySnow Thrower Safety AnotherAssembly Operation Starting a Flooded Engine Starting a Warm EngineOperating the Coupler Operating Position Installing Optional ATTACH- MentsTrimmer Line Advance Cutting MethodsInspect and Clean Unit and Labels MaintenanceClean AIR Filter Check for Loose Fasteners and PartsCarburetor Adjustment Service and AdjustmentsReplace Spark Plug Replacing the LineSeasonal Storage StorageEngine OtherDeclaration of Conformity Troubleshooting Table Cause RemedyEC Declaration of Conformity relating to 2000/14/EC Noise Levels Octave Band Analysis 100-10000hz 1/3 Octave Technical Data Sheet