Know Your Trimmer, ON/STOP Switch Choke

KNOW YOUR TRIMMER

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

Assist Handle Tube

Trimmer

Head

Shield

Throttle Trigger

ON/STOP

Switch

Starter

Rope

Handle

Spark Plug	Line Limiter

Blade

Choke lever

Primer Bulb

Fuel Mix Fill Cap

	ON/STOP SWITCH	CHOKE
	The ON/STOP switch is used to stop engine. To	The CHOKE helps to supply fuel to the engine
	stop the engine, push and release the engine	to aid in cold starting. Activate the choke by
	ON/STOP switch.	moving the choke lever to the FULL CHOKE
	PRIMER BULB	position. After the engine attempts to start, move
	The PRIMER BULB removes air from the car-	the choke lever to the HALF CHOKE position.
	buretor and fuel lines and fills them with fuel.	Once engine has started, move the choke lever
	This allows you to start the engine with fewer	to the OFF CHOKE position.
	pulls on the starter rope. Activate the primer
	bulb by pressing it and allowing it to return to
	its original form.

	BEFORE STARTING ENGINE	read and follow the safety rules relating to fuel
	WARNING: Be sure to read the fuel	before fueling your unit.
		IMPORTANT
	information in the safety rules before you	Experience indicates that alcohol blended
	begin. If you do not understand the safety	fuels (called gasohol or using ethanol or
	rules, do not attempt to fuel your unit. Call	methanol) can attract moisture which leads to
	1-800-554-6723.	separation and formation of acids during stor-
	FUELING ENGINE	age. Acidic gas can damage the fuel system
		of an engine while in storage.
	WARNING: Remove fuel cap slowly	To avoid engine problems, empty the fuel sys-
	when refueling.	tem before storage for 30 days or longer.
		Drain the gas tank, start the engine and let it
	This engine is certified to operate on unleaded
		run until the fuel lines and carburetor are
	gasoline. Before operation, gasoline must be	empty. Use fresh fuel next season.
	mixed with a good quality synthetic 2-cycle	Never use engine or carburetor cleaner prod-
	air-cooled engine oil designed to be mixed at
		ucts in the fuel tank or permanent damage
	a ratio of 40:1. Poulan/Weed Eater brand
		may occur.
	synthetic oil is recommended. Mix gasoline
		See the STORAGE section for additional in-
	and oil at a ratio of 40:1. A 40:1 ratio is obtained
		formation.
	by mixing 3.2 ounces of oil with 1 gallon of
		HOW TO STOP YOUR UNIT
	unleaded gasoline. DO NOT USE automotive
	oil or boat oil. These oils will cause engine	S To stop the engine, push and release the
	damage. When mixing fuel, follow instructions	engine ON/STOP switch. The switch will
	printed on container. Once oil is added to	automatically return to the ON position.
	gasoline, shake container momentarily to	Wait 5 seconds before attempting to restart
	assure that the fuel is thoroughly mixed. Always	unit to allow switch to reset.

530163448 specifications

The Weed Eater 530163448 is an essential tool for homeowners and gardening enthusiasts who are serious about maintaining a well-groomed outdoor space. This trimmer, known for its lightweight design and powerful performance, is ideal for tackling grass, weeds, and vegetation in hard-to-reach areas.

One of the standout features of the Weed Eater 530163448 is its 25cc two-cycle engine, which delivers robust power for efficient cutting and trimming. This engine is designed for ease of starting with its spring-assisted starting mechanism, allowing users to get to work quickly without the frustration of difficult starts. The trimmer's engine is also a key component in ensuring consistent performance, making it suitable for a variety of landscaping tasks.

The design of the Weed Eater 530163448 emphasizes user comfort and control. It boasts an ergonomic handle that provides a sturdy grip, reducing fatigue during extended use. Additionally, the adjustable shaft allows users to customize the length of the trimmer for optimal reach, making it easier to navigate around flower beds, trees, and fences.

Another significant characteristic of the Weed Eater 530163448 is its versatility. It comes equipped with a dual-line auto-feed head, which ensures that the cutting line is always fed at the right length during operation. This feature contributes to extended run time and minimizes downtime, allowing users to focus on their trimming tasks.

The trimmer is also designed with durability in mind. Constructed with high-quality materials, the Weed Eater 530163448 can withstand various weather conditions and regular usage. Its lightweight design, combined with the robust engine, enhances maneuverability, making it easy to carry and use across different terrains.

In terms of technology, the 530163448 utilizes advanced engine technology that minimizes exhaust emissions, promoting a cleaner and more environmentally friendly operation. This is especially appealing to homeowners who are conscious about their ecological footprint while taking care of their lawns.

In summary, the Weed Eater 530163448 is a reliable and efficient trimmer that combines power, comfort, and user-friendly features. Its impressive engine, ergonomic design, and versatile cutting capabilities make it a valuable addition to any outdoor maintenance toolkit, ensuring that your gardening tasks are completed with ease and precision.