REFILLING THE SPOOL WITH LINE
WARNING: Use only 0.080” (2 mm) diameter round line. Other sizes and shapes of line will not advance properly and will result in improper cutting head function or can cause serious injury. Do not use other materi- als such as wire, string, rope, etc. Wire can break off during cutting and become a dan- gerous missile that can cause serious injury.
SCut a length of 30 feet of 0.080” (2 mm) di- ameter round Poulan/Weed Eater! brand line.
Feed line in direction shown on spool.
Spool
SInsert one end of line into center cavity of
empty spool. Ensure line will feed into spool in the direction shown on the spool (counterclockwise).
SContinue feeding line into spool, leaving 4
INSTALLING SPOOL WITH LINE
SInstall replacement spool.
SThread line through line guide ring.
Line through guide ring
Slot
Replacement Spool
SRest guide ring on spool and place line in
slot. Allow line to extend 4
SEnsure line remains in slot while screwing cap on to the shaft. Only tighten cap hand tight!
We recommend all service and adjustments not listed in this manual be performed by an Authorized Service Dealer.
CARBURETOR ADJUSTMENTS
Your carburetor is equipped with limiter caps. Carburetor adjustment is a complicated task. We recommend that you take your unit to an Authorized Service Dealer. Damage will oc- cur if you turn the needles beyond the limiter stops.
IGNITION TIMING
The ignition timing is fixed,
SPARK PLUG
Replace the spark plug yearly using a Cham- pion
Need Assistance?
Call
Need Service Parts?
Contact your dealer .
5