HOW to Stop Your Unit, Operating Position

This engine is certified to operate on un- leaded gasoline. Gasoline must be mixed with a good quality 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/Weed Eater brand oil is recom- mended. (A 40:1 ratio is obtained by mixing

3.2ounces of oil with 1 gallon of unleaded gasoline). When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules under FUEL SAFETY.

HOW TO STOP YOUR UNIT

To stop the engine, push and release the en- gine STOP switch. The switch will automati- cally return to the ON position. Wait 5 sec- onds before attempting to restart unit to allow switch to reset.

HOW TO START YOUR UNIT

Starting Position

Choke lever

Trigger

Primer Bulb

Muffler

STARTING A WARM ENGINE

SMove choke lever to OFF CHOKE position. S Pull starter rope handle until engine runs. S If engine does not start in 5 pulls, follow instructions in STARTING A COLD EN-

GINE.

OPERATING POSITION

ALWAYS WEAR:					Eye
ALWAYS WEAR:					Eye

Protection

Long Pants

Heavy Shoes

Cut from your right to your left.

ADVANCING THE CUTTING LINE

Advance line by tapping the bottom of the cut- ting head lightly on the ground while engine is running at full speed. A metal blade attached to the shield will cut the line to the proper length.

TWIST-N-EDGE

SPull the tab toward the engine.

STwist the tube to the edging position; release the tab.

Tab

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

COLD ENGINE STARTING (or a warm engine after running out of fuel)

SSet unit on a flat surface.

SSlowly press the primer bulb 6 times.

SMove choke lever to FULL CHOKE posi- tion.

S Squeeze the throttle trigger fully and hold through all remaining steps.

SPull starter rope handle sharply 6 times. S Move choke lever to HALF CHOKE posi-

tion.

S Pull starter rope handle no more than 6 pulls, until engine runs.

S Allow engine to run 10 seconds, then move choke lever to OFF CHOKE position.

REPLACING THE LINE

SRemove spool by firmly pulling on tap but- ton.

SClean entire surface of hub and spool.

S Replace with a pre-wound spool, or cut a length of 20 feet of 0.080” (2 mm) diameter Poulan/Weed Eaterr brand line. Never use wire, rope, string, etc., which can break off and become a dangerous missile.

SInsert one end of the line about 1/2 inch (1 cm) into the small hole on the inside of spool.

Small

Hole

Spool

530088832 specifications

The Weed Eater 530088832 is a highly regarded solution for homeowners and professionals alike who need an efficient and reliable trimmer. This model stands out for its straightforward design, durability, and performance. Ideal for tackling tough overgrowth and maintaining a well-manicured lawn, the Weed Eater 530088832 boasts several features that enhance its usability and effectiveness.

One of the notable features of the Weed Eater 530088832 is its lightweight construction, making it easy to maneuver during prolonged use. This trimmer is designed with user comfort in mind, reducing fatigue and allowing for more extended periods of operation. Additionally, its ergonomic handle provides a comfortable grip, allowing users to perform their lawn care tasks with ease and precision.

This trimmer is powered by a robust engine that delivers consistent performance. The engine is designed to provide ample power while remaining efficient, enabling users to cover larger areas without frequently needing to refuel. This reliability ensures that the Weed Eater 530088832 can tackle even the toughest grass, weeds, and underbrush, making it a versatile tool for various landscaping tasks.

The Weed Eater 530088832 features a dual-line cutting system that enhances its cutting capabilities. This technology allows for quicker and more efficient trimming, helping users finish their tasks in less time. The trimmer head is easy to reload, ensuring that users can quickly replace the line when needed, reducing downtime during the job.

Safety is also a crucial consideration with the Weed Eater 530088832. The model incorporates various safety features to protect the user, such as a protective shield that prevents debris from being thrown back during operation. This added layer of safety makes it suitable for both seasoned landscapers and those less experienced.

Furthermore, the Weed Eater 530088832 is designed for ease of maintenance. The engine components are accessible, allowing users to perform routine checks and cleanings with minimal hassle. This user-friendly approach ensures that the trimmer maintains optimal performance for many years.

In summary, the Weed Eater 530088832 represents a blend of power, efficiency, and user comfort. With its lightweight design, reliable engine, dual-line cutting system, and safety features, this trimmer is an excellent choice for anyone looking to maintain a beautiful yard without compromising on quality or safety. Whether you're a homeowner or a professional landscaper, the Weed Eater 530088832 can meet your trimming needs.