AXIS 2
BEFORE SWITCHING OFF THE POWER:
When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power.
DO NOT switch off the power when | Switch off the power after the | |
disc holder has been closed | ||
the disc holder is open. | ||
with the “OPEN/CLOSE” button | ||
|
TROUBLESHOOTING:
Symptom | Possible Cause | Corrective Action |
|
|
|
The power fails to switch on when the | Poor power plug connection at the AC | Insert the power plug firmly into the AC |
POWER switch is set to on | outlet or IEC Power cord loose from | outlet and make sure connection is |
| rear of unit | good in unit rear |
Disc play does not start | The disc is loaded upside down | Reload the disc with the label side up |
| The disc is too dirty | Clean the disc |
|
|
|
No sound | Improper output cable connections | Connect the output cables correctly |
| Improper amplifier operation | Check amplifier setup |
Sound skips | The CD player is subject to vibrations | Change the installation location |
| or physical shock |
|
| The disc is too dirty | Clean the disc |
Hum | Loose cable connections | Firmly connect all audio plugs |
|
|
|
©2001 Numark Industries | - The Leader in DJ Technology | http://www.numark.com |
- 14 - |