McCulloch 966625201, MC3516 Throttle LOCK-OUT, CHOKE/FAST Idle Lever, Primer Bulb, Chain Brake

Page 9

THROTTLE LOCK-OUT

The THROTTLE LOCK--OUT must be pressed before you can squeeze the throttle trigger. This feature prevents you from acci- dentally squeezing the trigger.

CHOKE/FAST IDLE LEVER

The choke and fast idle are set by pulling the CHOKE/FAST IDLE LEVER out to the full ex- tent for cold starting or after refueling. The choke provides additional fuel to the engine during cold starting.

PRIMER BULB

The PRIMER BULB circulates fuel to the car- buretor to provide quicker starting.

CHAIN BRAKE

The chain brake is a device designed to stop the chain if kickback occurs. The chain brake

activates automatically in the event of kick- back. The chain brake activates manually if the front hand guard is pushed forward. The chain brake is disengaged by pulling the front hand guard back toward the front handle as far as possible.

CHAIN TENSION

It is normal for a new chain to stretch during the first 15 minutes of operation. You should check your chain tension each time before you start the chain saw. See CHAIN TENSION under the ASSEMBLY section.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury to the operator and/or damage the chain mak- ing it unusable.

BEFORE STARTING ENGINE

WARNING: Muffler is very hot dur- ing and after use. Do not touch the muffler or allow combustible material such as dry grass or fuel to do so.

WARNING: Be sure to read the fuel handling information in the safety rules sec- tion of this manual before you begin. If you do not understand the fuel handling information do not attempt to fuel your unit. Seek help from someone that does understand the in- formation or call the customer assistance help line at 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slow- ly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on un- leaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. A 40:1 ratio is ob- tained by mixing 3.2 fluid ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline. Pour the entire contents of the 3.2 ounce (95 ml) container of oil into 1 gallon (4 liters) of gasoline to achieve the proper fuel mixture. DO NOT USE automotive or marine oil. These oils will cause engine damage. When mixing fuel follow the instructions printed on the container. Once oil is added to gasoline, shake container momentarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relating to fuel be- fore fueling your unit.

CAUTION: Never use straight gasoline in your unit. This will cause permanent engine damage and void the limited warranty.

FUEL REQUIREMENTS

This engine requires the use of minimum 87 octane [R+M]/2 clean gasoline.

IMPORTANT

Use of alcohol blended fuels (called gasohol or using ethanol or methanol) can cause major engine performance and durability problems.

WARNING: Alternative fuels (not gasoline) such as E--15 (15% alcohol), E--20 (20% alcohol), E--85 (85% alcohol) are NOT classified as gasoline and are NOT approved for use in 2--stroke gasoline engines. Use of al- ternative fuels will cause problems such as: im- proper clutch engagements, overheating, va- por lock, power loss, lubrication deficiency, deterioration of fuel lines, gaskets and internal carburetor components, etc. Alternative fuels cause high moisture absorption into the fuel/oil mixture leading to oil and fuel separation.

BAR AND CHAIN LUBRICATION

The bar and chain require continuous lubrica- tion. Lubrication is provided by the automatic oiler system when the oil tank is kept filled. Lack of oil will quickly ruin the bar and chain. Too little oil will cause overheating shown by smoke coming from the chain and/or discolor- ation of the bar.

In freezing weather oil will thicken, making it necessary to thin bar and chain oil with a small amount (5 to 10%) of #1 Diesel Fuel or kerosene. Bar and chain oil must be free flowing for the oil system to pump enough oil for adequate lubrication.

If bar and chain oil is not available, use a good grade SAE 30 oil.

SNever use waste oil for bar and chain lubri- cation.

SAlways stop the engine before removing the oil cap.

CHAIN BRAKE

Ensure chain brake is disengaged by pulling the front hand guard back toward the front han- dle as far as possible. The chain brake must be disengaged before cutting with the saw.

WARNING: The chain must not move when the engine runs at idle speed. If the chain moves at idle speed refer to CAR- BURETOR ADJUSTMENT within this manual. Avoid contact with the muffler. A hot muffler can cause serious burns.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Manual de Instrucciones Manuel d’Instructions Starting Reminder Plan AheadTions found in this manual Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackAvoid Pinch-Kickback Avoid Pull-InKickback Safety Features Chain Brake and CKA AngleChain saws as set by Ansi B175.1 Attaching the BAR & Chain If not AssemblyAdjusting the tension Chain TensionChecking the tension ON/STOP Switch Throttle Trigger OperationKnow Your Chain SAW CHOKE/FAST Idle Lever Throttle LOCK-OUTPrimer Bulb Chain BrakeStarting a Warm Engine Important Points to RememberDifficult Starting or starting a flooded engine Right Foot Through Rear HandleInertia activating function control Braking function control Caution The chain brake must beOperating Tips Tree Felling TechniquesNotch CUT and Felling the Tree Felling Large TreesCutting a Fallen Tree Important PointsBucking Without a Support Bucking Using a LOG or Support StandLimbing and Pruning Important Points LimbingService Clean AIR Filter Inspect and Clean Unit and DecalsCheck Guide BAR Check Fuel Mixture LevelChain Adjustment Cleaning the Spark ARREST- ING ScreenReplace Spark Plug To Sharpen ChainStorage Carburetor AdjustmentIdle Speed-T Cooling SystemFuel System Load Adjustment EngineEngine OtherLigations The U.S. Environmental McCulloch

576600401, MC3516, 966625201 specifications

The McCulloch 966625201 and 576600401 models, along with the MC3516, represent a dynamic trio of outdoor power equipment designed to enhance gardening and landscaping tasks. These products are renowned for their reliability, efficiency, and user-friendly features, making them popular choices among both homeowners and professionals.

The McCulloch 966625201 chainsaw is particularly noted for its high performance and durability. It features a powerful engine that delivers excellent cutting performance, enabling users to tackle a variety of wood-cutting tasks with ease. The chainsaw's ergonomic design ensures comfort during extended use, reducing fatigue for the operator. Additionally, the tool is equipped with an easy-start system and a low-vibration mechanism, enhancing both usability and safety.

Another impressive model, the McCulloch 576600401, is a robust trimmer designed for versatility in lawn care. This model boasts a powerful motor and a dual-line feed system, providing efficient cutting and trimming capabilities for various vegetation types. The trimmer’s adjustable handle allows for a customizable grip, which is essential for reaching difficult angles or tight spots around gardens. Its lightweight design simplifies maneuverability, making it a favorite for both amateur gardeners and savvy landscapers.

The McCulloch MC3516 is a multi-functional tool that combines a chainsaw, hedge trimmer, and pruner, making it an invaluable addition to any homeowner’s toolkit. The MC3516 stands out with its innovative combination of features, allowing users to switch between tasks effortlessly. The detachable components are easy to change, enhancing versatility while minimizing the need for multiple tools. Its compact design and lightweight construction make it easy to transport and store, catering to those with limited space.

All three models exhibit advanced technologies aimed at improving performance and user experience. They are designed with eco-friendly principles, ensuring reduced emissions and noise levels during operation. Moreover, features like automatic oiling systems and quick chain tensioning ensure optimal maintenance with minimal user effort. These characteristics underline McCulloch’s commitment to delivering tools that not only excel in power and efficiency but also prioritize environmental sustainability.

In conclusion, the McCulloch 966625201, 576600401, and MC3516 provide an array of features and technologies that set them apart in the market. Their ease of use, ergonomic designs, and innovative functionalities make them excellent choices for anyone looking to enhance their outdoor maintenance capabilities. Whether for professional landscaping or home gardening, these tools embody McCulloch’s promise of performance and reliability.
Top Page Image Contents