Troy-Bilt 24C-060F063 manual Attaching The Handle, Attaching The Hose Assembly, Attaching The Bag

Page 6

Attaching The Handle

•Unfold the upper handle until it aligns with the lower handle.

•Secure the two handles by tightening the wing nuts (carriage bolts must be seated properly into the handle). See Figure 1.

•Remove the hairpin clips from the handle brackets on the Yard Vacuum and remove the carriage bolts and wing nuts from the lower handle. See Figure 2.

•Place the bottom holes in lower handle over pins on handle brackets and secure with hairpin clips.

•Insert carriage bolts through upper hole in lower handle from the outside and secure with wing nuts.

Wing Nuts

Carriage Bolt

Hairpin Clip

Figure 2

•Loosen the wing nut that secures the rope guide to the right side of upper handle.

•Pull the starter rope out of the engine slowly and slip the starter rope into the rope guide. Tighten the wing nut.

Attaching The Hose Assembly

•Slide hose adapter of hose assembly into the base adapter located on the left front of the Yard Vacuum. See Figure 3.

•Pull spring loaded pin out on the base and align pin with the first hole in the hose adapter.

•Release the pin to lock the hose in place.

•Connect the hose handle near nozzle end of hose to the side bracket on the upper handle. Refer to Figure 6.

•Snap hose handle to the lower handle bracket to secure in place and lay hose tubing on side hanger bracket next to chipper chute. Refer to Figure 6.

Hose

Adapter

Spring

Loaded Pin

Figure 3

Attaching The Bag

•Grasp bag handle with one hand and slide locking rod on mounting bracket with other hand toward engine. Use the end of mounting bracket as leverage when sliding the locking rod. See Figure 4.

•Slip bag over the rim of the discharge opening and release locking rod to secure bag in place.

•Place the straps on the bag over the lower handle, hooking them on the studs.

•Snap bag clip to the top of the lower handle.

NOTE: The safety switch button attached to the mounting bracket must be fully depressed by the front tab on the bag handle when securing the bag or the engine will not start. See Figure 4.

Bag Handle

 

Straps

 

Stud

 

Bag Clip

 

Front Tab

Stud

 

Locking

 

Rod

 

Safety Switch

 

Figure 4

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator’s Manual Engine Information Table of ContentsFinding Model Number Calling Customer SupportImportant Safe Operation Practices TrainingPreparation Maintenance and Storage OperationRemoving Unit From Carton Disconnecting Spark Plug WireAssembling Your Yard Vacuum Loose Parts In Carton See FigureAttaching The Hose Assembly Attaching The HandleAttaching The Bag Bag Know Your Yard VacuumStarter Handle Bag HandleStarting Engine Operating Your Yard VacuumGas And Oil Fill-Up Stopping EngineUsing the Nozzle Vacuum Using the Hose AssemblyNozzle Height Adjustment Customer ResponsibilitiesLubrication Maintenance Removing The Flail ScreenEngine Storing Your Yard Vacuum Troubleshooting Problem Cause RemedyMANUFACTURER’S Limited Warranty for

24B-060F063, 24C-060F063 specifications

The Troy-Bilt 24C-060F063 and 24B-060F063 are remarkable string trimmers known for their power, versatility, and user-friendly designs. These tools are essential for maintaining a well-groomed lawn and tackling tough landscaping tasks, providing an array of features that make them popular among homeowners and professionals alike.

One of the main features of both models is their lightweight construction, which allows for easy maneuverability while trimming. The trimmers are equipped with a 25cc 2-cycle engine, delivering robust performance and enabling users to handle thick grass and weeds without difficulty. The combination of power and efficiency ensures that users can complete their tasks quickly and effectively.

Equipped with a straight shaft design, both the 24C-060F063 and 24B-060F063 provide extended reach, making it easier to access hard-to-reach areas such as under benches, shrubs, and along fences. This design also ensures that users can maintain a comfortable posture during operation, reducing the risk of fatigue.

The bump head feature allows for quick and easy line advancement, ensuring that users spend less time preparing their tools and more time working. With a simple bump on the ground, users can release additional line when needed, streamlining the trimming process.

Troy-Bilt has incorporated their Easy Start technology, which significantly reduces the effort required to start the engine. This feature is particularly beneficial for users who may struggle with traditional starting methods, making the trimmers accessible to a wider range of people.

Another noteworthy characteristic of these trimmers is their versatility. Both models support a variety of attachments, transforming them into multi-functional tools ready to tackle a range of landscaping tasks such as edging, cultivating, and even pruning. This adaptability offers users the convenience of using one tool for multiple applications.

Additionally, the trimmers feature ergonomic handles designed for comfort and grip, reducing strain on the hands and arms during extended use. With adjustable settings, users can customize the trimmers to suit their preferences, enhancing the overall efficiency of the task.

In summary, the Troy-Bilt 24C-060F063 and 24B-060F063 string trimmers stand out in the market due to their powerful engines, ease of use, and versatility. With their lightweight design, efficient bump head line feed, and innovative starting technology, they provide an excellent solution for anyone looking to maintain a beautiful landscape with minimal effort.
Top Page Image Contents