Numark Industries CDN-88 manual Program Functions, General

Quantization Oversampling rate Frequency response Channel separation T.H.D. + NOISE S/N ratio (IHF-A) Output level

Short access time (Play next track)

Long access time (Track 1 ->Track 20)

Digital Output

SPECIFICATIONS

TECHNICAL:

CDN-88 Dual CD Player

PROGRAM FUNCTIONS

This button provides several programmable functions depending upon the combination of buttons used.

Track Sequence Program - Depress while the unit is stopped and the program indicator will light. Select each track to be

programmed and press between selections. Press to start the track program. To exit and erase program hold for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.

End of track dead space elimination – holding down and pressing will show and option for eliminating the dead space at the end of tracks. This is useful if you are playing a CD continuously and want to eliminate the gaps between songs. The unit will startup with this in the off position. The display will indicate “0 space” when the function is set to eliminate space. Setting this function on one side will affect both sides. This way you can enable the function while CD 1 is playing by using CD 2.

Relay time - holding down and pressing will show options for the amount of time used for relaying between tracks. Options will appear to relay immediately after the track (0), with time added of 1,2,or 3 seconds(1,2,3), or a reduction of 1,2, or 3 seconds (-1,-2,-3). By reducing time the tracks will crossover before the end of a track, creating an automatic segue from master to slave. This feature will also work in track sequence program mode; however, if the sides are also in SINGLE mode the same number of tracks programmed should be the same. Play will stop at the end of the last track. Setting this function on one side will affect both sides. This way you can enable the function while CD 1 is playing by using CD 2.

FREE WHEEL CUE – holding down followed by will alternate the jog wheel between free wheel and non free wheel mode during cue operations. The sound during wheel rotation can be adjusted from a smooth “scratch” sound to the tradition “stutter” sound. The display will indicate FREE WHEEL when the “scratch” sound is active. This indication will go away when the style of cue is stutter. This setting will be remembered at power down.

Automatic door close protection – holding down followed by will adjust this option. The display will indicate 30 seconds, 60 seconds, 120 seconds, and (--) for no auto close. This setting will be remembered at power down. Setting this function on one side will affect both sides. This way you can enable the function while CD 1 is playing by using CD 2.

Digital Output – In order for the digital output to work the output must be turned on. To turn this on holding down followed by . When this is active digital out will turn on and all pitch and loop functions will disengage.

Smart Looping - To active smart looping hold down followed by at the same time. After this has been done all loop points and stuttering will follow the beat of the music.

16-bit linear/channel, 3 beam laser

8times 20Hz-20KHz 86dB 0.01% 94dB 2.0Vrms

less than 1.7sec

less than 3sec

type 2, form 1, S/PDIF (Sony/Phillips Digital Interface Format)

GENERAL:
Environmental:
Operating Temperature	5-35 deg. C
Humidity	25 to 85% RH (non-condensing)
Storage Temperature	-20 to 60 deg. C

Dimensions:

Main Unit: 482(W) x 88.8(H) x 264(D) mm (without feet) 19(W) x 3 1/2(H) x 10 3/8(D) inches (without feet)

Control Unit: 482(W) x 88.8(H) x 74(D) mm (without feet) 19(W) x 3 1/2(H) x 2 7/8(D) inches (without feet)

Weight:	Player Unit:		5	Kgs., 11 lbs.
	Control Unit:		2	Kgs., 4.4 lbs.
Power Supply:		115/230V AC, 50/60Hz
Power Consumption:		25W

	- The Leader in DJ Technology
©2000 Numark Industries	- 15 -	http://www.numark.com