Numark Industries DM1635 DJ MIC Section MASTER/BOOTH Output Section, Mic Off/On/Talkover Switch

Page 8

DM 1635

DJ MIC SECTION

MASTER/BOOTH OUTPUT SECTION

The D M 1 6 3 5 has an extremely flexible DJ Mic channel. The Talkover function reduces the level of the music while leaving the DJ Mic at normal volume.

8.Neutrik™ “Combo” connector allows connection of either a 1/4” jack or an XLR jack. This is ideal for connecting an XLR gooseneck directly into the mixer.

9.Treble and Bass Controls fine tune the tone of your voice on both mics through the sound system. The controls are detented for setting tone "flat". For best results, use a dynamic cardioid microphone.

10.The DJ Mic 1 Fader controls the DJ Mic volume for the Neutrik™ “Combo” connector.

11.The Mic 2 Fader controls the Mic volume for the 1/4” connector on the rear of the mixer.

12.Mic Off/On/Talkover Switch.

O f f turns off Mic 1

O n turns on Mic 1

Talkover turns down the input level of your music sources from Channels 1-4.

Talkover is very useful for making announcements without adjusting any levels.

Try using this feature for audience participation when you want the music to temporarily cease and the audience to be heard - “YEAH!”

13.The Stereo Master Fader controls the overall output level.

14.Stereo/Mono toggle adjusts the Master output for the operation selected.

15.The Zone Level controls speaker volume for a remote zone or booth monitors. If you do not use booth monitors the output can feed a tape deck, another amplifier, another mixer or a satellite speaker system. Note: This can also be used to supply line level audio to a lighting controller or to lights that are sound activated.

CONTRACTOR'S NOTE: Booth Level provides zone control in installations where there are two separate rooms, or a bar and dance floor, for example. Remote zone volume should be controlled from the D M 1 6 3 5.

16.Stereo Auto Peak Hold Level Indicator. This fast, accurate stereo meter tracks the output level. The red LEDs for +3dB, +5dB and +8dB hold program peaks for a second or two. With peak metering, it's OK to be "in the red" as long as +5dB or +8dB aren'tconstantly lit. Set the crossover, equalizer and power amp inputs to avoid distortion at each step in the audio chain. Proper attention to the peak meter results in the punchiest possible sound without audible distortion.

Numark - The Proven Leader in DJ Technology

©1997 Numark Industries

8

http://www.numark.com

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DM1635 Stereo Mixer with the Beatkeeper Helmsman Road, North Kingstown RISafety Instructions Index DM1635 Features Mixer features includeImportant Information DM 1635 Front Panel Diagram Crossfader Section Installation and OperationChannel INPUTS/CONTROLS Section DJ MIC Section MASTER/BOOTH Output Section Mic Off/On/Talkover SwitchPower Switch and Power On LED Equalizer SectionGeneral EQ Hints Monitor SectionChannel Select Sync Lock ButtonSync Lock LED Beat Assist ButtonBeat Assist Channel SelectionSyncing Your Beatkeeper Channel Mixing Prepping For a Mix Syncing To Off BeatsBeatkeeper Troubleshooting T4 Either the BPM display is blank, or it is noticeably offT9 The beat tracking suddenly gets off track DM1635 Rear Panel Diagram Rear Panel Inputs and OutputsDM1635 Connection Diagram Specifications Signal to Noise Ratios vs. maximum outputP U T S T P U T SBlock Diagram Equipment Transport

DM1635 specifications

The Numark Industries DM1635 is a standout in the realm of professional audio mixers, seamlessly combining user-friendly design with robust functionality. It is specifically tailored for DJs and audio enthusiasts who require a reliable and high-performing device for live performances, recording, and broadcasting.

One of the DM1635's main features is its 16-channel capability, allowing users to connect various audio sources simultaneously. This flexibility is crucial in live settings where multiple inputs might be needed. Each channel is equipped with a dedicated gain control, ensuring that users can achieve optimal levels without distortion or interference.

The mixer also boasts an intuitive layout, highlighted by its large, responsive faders, which provide precise control over audio levels. The presence of a 3-band EQ on each channel allows for fine-tuning frequencies—low, mid, and high—resulting in a more tailored sound output. This feature is especially valuable for DJs looking to manipulate their mixes and create unique audio experiences.

In terms of connectivity, the DM1635 does not disappoint. It includes balanced XLR outputs, TRS outputs, and multiple auxiliary sends. This extensive range of connectivity options enables seamless integration with various audio equipment, making it a versatile tool for different setups. Additionally, USB connectivity allows for easy recording and playback on digital audio workstations, expanding its utility even further.

Technology-wise, the DM1635 incorporates advanced DSP effects, which can enhance the overall sound quality during performances. These effects can be applied in real-time, providing DJs and sound engineers the ability to add depth and texture to their mixes. The built-in visual metering aids in maintaining levels, ensuring that users can monitor their audio output effectively.

Another noteworthy characteristic is its durable construction. Designed with mobility in mind, the DM1635 is lightweight yet built to withstand the rigors of travel and live performances. Its compact size makes it easy to transport, while the solid chassis ensures longevity.

Overall, the Numark Industries DM1635 mixer represents a strong choice for audio professionals seeking performance, versatility, and reliability in their equipment. Its blend of features, cutting-edge technology, and practical design make it an essential tool in the toolkit of any modern DJ or audio technician.
Top Page Image Contents