Troy-Bilt 466 manual Operatingyourlawnmower, UsingYourLawnMower, BaggingGrassClippings

Page 11

SECTION5: OPERATINGYOURLAWNMOWER

GasandOilFill-Up

WARNING: Never fill fuel tank indoors=or when engine is running or hot. Do not smoke

............. when filling up the fuel tank.

Service the engine with gasoline and oil as instructed in the separate engine manual packed with your mower. Read the instructionscaraful]y.

BeforeStartingMower

Attach spark plug wire to spark plug. Make certain the metal cap on the end of the spark plug wire (inside the rubber boot) is fastened securely over the metal tip on the spark plug.

StartingEngine

WARNING: Be sure no one other than the operator is standing near the lawn mower while

............ starting engine or operating mower.

WARNING: Never run engine indoors or in

enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

WARNING: Keep hands, feet, hair and

loose clothing away from any moving parts on engine and lawn mower.

Push the primer three times. Wait two seconds between each push. In temperatures below 55" F, prime five times. Do not prime to restart a warm engine after a short shutdown.

Standing behind the mower, depress the blade control handle and hold it against the upper handle.

Grasp starter handle and pull rope out slowly until engine reaches start of compression cycle (rope will pull slightly harder at this point). Let the rope rewind slowly. Pull rope with a rapid, continuous, full arm stroke. Keeping a firm grip on the starter handle, let the rope rewind slowly.

Once the engine has started, squeeze the lower bail handle and the blade control handle against the upper handle to run the mower.

StoppingEngine

Release blade control handle to stop the engine and the blade.

Disconnect spark plug wire and move away from spark plug to prevent accidental starting.

UsingYourLawnMower

Do not operate the mower without the mulching cover, the grass catcher bag, or the discharge chute properly installed.

Be sure that the lawn is clear of stones, sticks, wire, or other objects which could damage lawn mower or engine. Such objects could be accidently thrown by the mower in any direction and cause serious personal iniury to the operator and others.

For best results, do not cut wet grass because it tends to stick to the underside of the mower, preventing proper discharge of grass clippings, poor mulching conditions, and could cause you to slip and fall New grass, thick grass, or wet grass may require a narrower cut.

For a healthy fawn, always cut off one-third or less of the total length of the grass. Lawn should be trimmed in fall as long as there is growth.

_

WARNING: If you strike a foreign object,

_stop

the engine. Remove spark plug wire from

 

spark plug, thoroughly inspect the mower for

 

any damage. Repair the damage before

 

restarting and operating the mower. Extensive

 

vibration of the mower during operation is an

 

indication of damage. The unit should be

 

promptly inspected and repaired.

AdjustingCuttingHeight

Refer to pages "14and 15 for instruction on how to adjust the cutting height and the handle height.

For best results in mowing, keep the cutting height position high until you have determined which cutting height is preferred.

BaggingGrassClippings

You can use the grass catcher bag to collect clippings while you are operating the mower.

Attach the grass catcher following instructions on page 8 of this manual. The grass clippings will automatically collect in the bag as you run the mower.

Operate the mower till the grass bag is full. Refer to page 10 for description of bag-till indicator.

Step the engine completely by releasing the control handle.

Make sure that the unit has come to a complete stop.

Lift discharge deer and pull grass bag up and away from the mower to dispose of the grass clippings.

11

Image 11
Contents Operators Manual Tableofcontents GeneralOperation ImportantsafeoperationpracticesGo Net ServiceSlopeOperation ChildrenYourResponsibility GeneralServiceWARN,NG ToolsRequired DisconnectingSparkPlugAssemblingyourlawnmower RemovingUnitFromCartonAttachingStarterRope GrassCatcherAssemblyPin Convertingto SideDischargeRemovingGrassCatcher Knowyourlawnmower BaggingGrassClippings UsingYourLawnMowerOperatingyourlawnmower LubricationseeFigure CleaningtheMowerEngineMaintenance MaintainingyourlawnmowerReplacingDriveBelt ServicingyourmowerBladeCare ReplacingRearFlap MakingadjustmentsHandleHeight Storage OFF-SEASONSTORAGECuttingHeight CarburetorTROUBLE-SHOOTINGGUIDE Safety& DecorativeLabels PARTSLISTFORMODEL466 Model466 Manufacturers Limited Warranty for

466 specifications

The Troy-Bilt 466 is a robust and reliable outdoor power equipment product designed to meet the needs of homeowners and landscaping professionals alike. Renowned for its durability and performance, the Troy-Bilt 466 features a range of attributes that enhance its usability and efficiency.

At the heart of the Troy-Bilt 466 is a powerful 4-cycle engine that provides exceptional torque and power. This engine is engineered to minimize emissions while maximizing fuel efficiency, allowing users to work longer without the need for frequent refueling. The machine is equipped with an easy-start system that ensures a smooth and straightforward startup process, eliminating the frustration often associated with traditional pull-start engines.

One of the key features of the Troy-Bilt 466 is its adjustable cutting height. Users can choose from multiple height settings, making it suitable for a variety of grass types and lengths. This versatility means that whether you’re preparing a manicured lawn or tackling overgrown fields, the Troy-Bilt 466 can adapt to your specific needs.

The device also includes a sturdy cutting deck made from high-quality materials that withstands the rigors of outdoor use. The deck design promotes effective grass collection, which not only ensures a clean cut but also allows for the mulching of grass clippings. This feature is particularly advantageous for those who want to nourish their lawn by returning nutrients back into the soil.

In terms of technology, the Troy-Bilt 466 incorporates a user-friendly control panel that empowers operators to make real-time adjustments easily. The ergonomic handle design ensures comfort even during extended use, reducing fatigue and enhancing control over the equipment.

Another noteworthy characteristic of the Troy-Bilt 466 is its portability. The lightweight construction, combined with user-friendly wheels, makes it effortless to maneuver across various terrains. It’s ideal for maintaining gardens, lawns, and larger properties without the hassle often associated with heavier machinery.

Overall, the Troy-Bilt 466 is engineered with the user experience in mind, combining innovative technologies with practical features. This makes it an excellent choice for anyone looking to achieve a well-maintained outdoor space with ease and efficiency. Whether you are a seasoned landscaper or a weekend gardener, the Troy-Bilt 466 stands out as a reliable companion for all your yard maintenance needs.