Troy-Bilt CS4210, CS4265 Know Your Chipper Shredder, Attaching The Tow Bar Model CS4210 Only

Page 6

Attaching The Debris Collection Bag

•To attach the bag, place the opening of the bag completely over the discharge chute.

•Position the bag so that the wing knobs which secure the discharge chute to the impeller housing are completely covered.

•Pull on the drawstrap until the bag is tight around discharge chute opening.

Debris Collection Bag

Figure 2

Attaching The Tow Bar (Model CS4210 Only)

•To attach the tow bar, remove the spring pin and clevis pin from the end of the tongue.

See Figure 3.

Spring Pin

Tongue

Base

Clevis Pin

Figure 3

•Insert the tongue into the base. Reinsert the clevis pin through aligning holes in both the tongue and the base.

•Fasten with the spring pin to secure.

SECTION 3: KNOW YOUR CHIPPER SHREDDER

Read this operator’s manual and safety rules before operating your chipper shredder. Compare the illustrations in Figure 4 with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

Engine Controls

See the Briggs & Stratton Owner/Operator manual packed with your unit. for the location and function of the controls on the engine.

Starter Handle

The starter handle is located on the engine. Pull the starter handle to start engine. See Figure 4.

Spring Latch

The spring latch is located on the top of the hopper. It is used to release or lock the chipper chute in a raised position for storage or for transporting. See Figure 4.

WARNING: Never operate the chipper shredder with the chipper chute in the raised position. Use the spring latch to lower the chipper chute into the operating position before starting the engine.

Lock Rod

The lock rod is located on the chipper chute support. It is used to release or lock the chipper chute in a lowered position for operation. See Figure 4.

Chipper Chute

Branches up to 3” in diameter may be fed into the chipper chute for chipping. See Figure 4.

Hopper

Leaves, twigs and branches up to 1/2-inch in diameter may be placed into the hopper for shredding. See Figure 4.

IMPORTANT: Never place branches with a diameter greater than 1/2-inch in the hopper. Doing so can result in serious damage to your unit’s shredder blade, flails or impeller.

Handle

Use the handle when manually transporting the chipper shredder.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator’s Manual Engine Information Table of ContentsFinding Model Number Calling Customer SupportImportant Safe Operation Practices TrainingPreparation Maintenance and Storage OperationLoose Parts In Carton Safety Labels Found on Your UnitAssembling Your Chipper Shredder Lowering the Chipper ChuteKnow Your Chipper Shredder Attaching The Tow Bar Model CS4210 OnlyOperating Your Chipper Shredder Gas And Oil Fill-UpStarting Engine Shredding Stopping EngineOperating the Chipper Shredder Clearing the HopperMaintaining Your Chipper Shredder LubricationReplacing the Chipper Blades MaintenanceCleaning the Reduction Chamber EngineReplacing the Shredder Blade ChamberTroubleshooting Problem Cause RemedyStoring Your Chipper Shredder MANUFACTURER’S Limited Warranty for

CS4210, CS4265 specifications

Troy-Bilt is a trusted name in outdoor power equipment, and their CS4210 and CS4265 chipper shredders reflect the brand’s commitment to quality and efficiency. These machines are designed to help homeowners manage yard waste effectively, turning branches, leaves, and other debris into valuable mulch or compost.

The CS4210 is robust yet compact, making it ideal for residential use. It features a 9.5 ft-lb torque overhead valve engine, providing ample power for tackling small to medium-sized branches and yard waste. The 2-in-1 capability of the CS4210 allows users to chip wood up to 3 inches in diameter while simultaneously shredding leaves and smaller debris. This versatility is perfect for homeowners looking to streamline yard upkeep.

On the other hand, the CS4265 offers enhanced features with a larger 11 ft-lb torque engine, allowing it to handle larger branches up to 4 inches in diameter. This model incorporates a heavy-duty steel frame, which enhances durability and reduces vibration during operation. Additionally, the CS4265 comes equipped with a self-feed hopper that automatically pulls in branches, making it easier for users to process larger amounts of waste without needing to force materials into the machine.

Both models are built with ease of use in mind. They feature a hassle-free start system, allowing for quick and easy ignition without the need for priming or choking. The machines have a wide feeding opening that accommodates different types of yard waste, while their compact designs make them easy to maneuver around the yard.

Safety is a priority for Troy-Bilt, exemplified in these models with features such as a no-tool access to the blades, ensuring safe and easy maintenance. The durable shredding blades are designed to withstand wear, providing maximum performance and longevity.

Overall, the Troy-Bilt CS4210 and CS4265 chipper shredders represent an excellent investment for homeowners looking to enhance their landscaping efforts while effectively managing yard waste. With their combination of power, efficiency, and user-friendly features, these machines are indispensable tools for maintaining a tidy and environmentally friendly yard.
Top Page Image Contents