X-LPSV8 AMPLIFIER PROBLEMS?
Basic
Problem | Probable Cause | Remedy |
|
|
|
No power | Mains power supply is not fully | Plug in securely |
| inserted into mains socket |
|
| Mains power supply lead is not fully |
|
| inserted into rear socket |
|
|
|
|
No sound | Wrong connections between input | Check audio input lead connections |
| sources and the unit |
|
| Cartridge incorrectly wired | Check cartridge wiring |
|
|
|
Sound is not precise, lacking in bass | Cartridge incorrectly wired | |
and stereo image |
| cartridge and turntable |
| Input connector plugs not fully | manuals/wiring diagrams. |
| Check plugs are inserted fully and | |
| pushed in | |
| Output connector plugs not fully | securely |
|
| |
| pushed in |
|
|
|
|
Hum | Turntable not earthed and needs | Check turntable earthing lead is |
| earthing | connected to earthing post on XLPS |
|
| V8 |
| Turntable already earthed and makes | Disconnect Earthing lead from |
| hum loop in system | earthing post |
| Audio connector plug not fully | Insert plug securely |
| pushed in | Check cable is connected at both |
| Cable Fault | ends. |
| Unsuitable Cable | N.B. some esoteric cables have |
| (e.g. cable grounds not connected) | internal wiring intentionally |
| disconnected/modified. For best | |
|
| |
|
| results on all inputs AND outputs, |
|
| please use good quality screened |
|
| coax; fully connected |
|
| |
|
|
|
Plop Heard in speakers when | High gain of XLPS V8 amplifying | Not a fault. |
switching on or off or changing | circuit transients. | Please ensure volume level on |
MM/MC switch |
| amplifier is turned down if switching |
|
| the XLPS V8 on or off or changing |
|
| cartridge type switch whilst |
|
| connected. |
If none of these actions affect a cure, please contact the dealer, or an authorised Musical Fidelity service agent. Remember; never open the case of the
Issue 1 | Page 8 of 10 |
|
|