Troy-Bilt 410, 420 warranty Safe Operation Practices

Page 5

Operation

1.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

2.Before starting the machine, make sure the chipper chute, feed intake, and cutting chamber are empty and free of all debris.

3.Thoroughly inspect all material to be shredded and remove any metal, rocks, bottles, cans, or other foreign objects which could cause personal injury or damage to the machine.

I4. f it becomes necessary to push material through the shredder hopper, use a small diameter stick. Do not use your hands or feet.

I5. f the impeller strikes a foreign object or if your machine should start making an unusual noise or vibration, immediately shut the engine off. Allow the impeller to come to a complete stop. Disconnect the spark plug wire, ground it against the engine and perform the following steps:

a.Inspect for damage.

b.Repair or replace any damaged parts.

c.Check for any loose parts and tighten to assure continued safe operation.

6.Do not allow an accumulation of processed material to build up in the discharge area. This can prevent proper discharge and result in kickback of material through the feed opening.

7.Do not attempt to shred or chip material larger than specified on the machine or in this manual. Personal injury or machine damage could result.

8.Never attempt to unclog either the feed intake or discharge opening while the engine is running. Shut the engine off, wait until all moving parts have stopped, disconnect the spark plug wire and ground it against the engine before clearing debris.

9.Never operate without the shredder hopper, chipper chute, or chute deflector properly attached to the machine. Never empty or change discharge bag while the engine is running.

10.Keep all guards, deflectors and safety devices in place and operating properly.

11.Keep your face and body back and to the side of the chipper chute while feeding material into the machine to avoid accidental kickback injuries.

12.Never operate this machine without good visibility or light.

13.Do not operate this machine on a paved, gravel or non-level surface.

14.Do not operate this machine while under the influence of alcohol or drugs.

15.Muffler and engine become hot and can cause a burn. Do not touch.

16.Never pick up or carry machine while the engine is running.

Maintenance & Storage

1.Never tamper with safety devices. Check their proper operation regularly.

2.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage and repair, if needed.

3.Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller and all moving parts have stopped. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

4.Do not change the engine governor settings or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

5.Maintain or replace safety and instruction labels, as neces- sary.

6.Follow this manual for safe loading, unloading, transporting, and storage of this machine.

7.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer, etc.

8.Always refer to the operator’s manual for proper instructions on off-season storage.

9.If the fuel tank has to be drained, do this outdoors.

10.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

Do not modify engine

To avoid serious injury or death, do not modify engine in any way. Tampering with the governor setting can lead to a runaway engine and cause it to operate at unsafe speeds. Never tamper with factory setting of engine governor.

Notice regarding Emissions

Engines which are certified to comply with California and federal EPA emission regulations for SORE (Small Off Road Equipment) are certified to operate on regular unleaded gasoline, and may include the following emission control systems: Engine Modifica- tion (EM) and Three Way Catalyst (TWC) if so equipped.

Your Responsibility

Restrict the use of this power machine to persons who read, un- derstand and follow the warnings and instructions in this manual and on the machine.

2

Safe

Operation

Practices

WARNING

This symbol points out important safety instructions, which if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this man- ual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol.

HEED IT’S WARNING!

Your Responsibility Restrict the use

of this power machine to persons who read, understand

and follow the warnings and instructions

in this manual

and on the machine.



Page 4 Page 6
Image 5
Page 4 Page 6
Contents Chipper Shredder Model Series 410 OPERATOR’S ManualCustomer Support Table of ContentsFinding and Recording Model Number Labels SafetyPractices Safe OperationOperation Safe Operation PracticesTo the operator or bystanders Setting Up Your Chipper ShredderBKnow Your Chipper Shredder Setting Up Your Chipper ShredderOperating Your Chipper Shredder Basic Starting ProcedureGas and Oil Fill-Up Starting EngineClearing the Hopper Operating The Chipper Shredder ShreddingChipping Emptying the Debris Collection BagMaintaining Your Chipper Shredder Storing Your Chipper Shredder Sharpening Or Replacing The Shredder BladeProblem Cause Remedy Trouble ShootingModel Series 410 To order replacement Parts, contact Or visit† Model 424 Only ‡ Model 414 Only Upper Chipper Chute Assembly MANUFACTURER’S Limited Warranty for

410, 420 specifications

The Troy-Bilt 410 and 420 are two impressive tillers that stand out in the market for their durability, performance, and innovative features. Designed for both novice gardeners and seasoned horticulturists, these tillers make soil preparation easier and more efficient.

One of the key features of both the Troy-Bilt 410 and 420 is their powerful engines. The 410 model is equipped with a robust 250cc engine, ensuring that it has enough power to handle tough soil conditions. The 420 model takes it a step further with a more powerful 305cc engine, providing increased torque for breaking up hard-packed soil and tilling larger areas. This higher horsepower translates to improved performance, allowing users to tackle even the most challenging gardening tasks with ease.

These tillers are designed with adaptability in mind. The Troy-Bilt 410 features a 14-inch tilling width, while the 420 offers a wider 16-inch tilling width. This means users can select the model that best fits their gardening needs, whether they are working with small garden beds or larger plots. The adjustable tilling depth feature allows users to cultivate the soil at varying depths, promoting better seed germination and healthier plant growth.

Another standout characteristic is the patented Forward and Reverse Tilling technology. This feature allows users to quickly switch between forward and reverse tilling directions, making it easier to navigate around tight spaces and flower beds. The counter-rotating tines further enhance performance by helping to break up hard soil clumps and allowing for a finer tilling finish.

User comfort and ease of operation are also prioritized in both models. The Troy-Bilt tillers come with comfortable handles and a lightweight design, making them easy to maneuver. The adjustable handlebars can be personalized for height, ensuring that operators can work without straining their backs.

Furthermore, both the 410 and 420 come with a durable construction, built to withstand rigorous use over the years. The heavy-duty tines are designed to last and provide dependable tilling results through a variety of soil conditions.

In summary, the Troy-Bilt 410 and 420 tillers are exceptional machines that combine powerful engines, innovative technologies, and user-friendly design. Whether preparing gardens for planting or maintaining established plots, these tillers deliver reliable performance and outstanding results, making them a top choice for gardeners of all skill levels.
Top Page Image Contents