Installation Instructions

UP TO 35ft.

(10.6m)

UP TO 16ft. (5m)

B156-002

Note: The installation diagram shows a B156-002, but installation will be the same for the B156-002-DVI and B156-002-HDMI.

1Make sure the DisplayPort source is powered off.

2Connect the source to the input port on the splitter using a P580- Series DisplayPort cable (or a P583-Series Mini DisplayPort to DisplayPort Cable). Note: The distance between the source and splitter must not exceed 16 ft. (5 m).

3Connect the included external power supply to the splitter, and plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU), or Uninterruptible Power Supply (UPS). The Green Power LED on the splitter will illuminate to indicate the unit is receiving power.

4Connect a monitor to the Output 1 port on the splitter using a DisplayPort (for B156-002), DVI (for B156-002-DVI), or HDMI (for B156-002-HDMI) cable. Note: See the Optional Accessories listing in this manual (under Package Contents) for recommended cables.

The distance between the splitter and monitor must not exceed 35 ft.

(10.6 m).	4

13-03-220-93323C.indd 4

3/19/2013 3:41:04 PM