AMS35i, Installation | Musical Fidelity AMS35I instruction

AMS35i

INTRODUCTION

Congratulations on the purchase of the new AMS35i Class A Integrated amplifier. Great attention has been paid to internal layout, isolating each circuit section to prevent possible interaction.

The unit features a finely tuned and tweaked , for smooth sound coupled with low noise and virtually no distortion.

The power amplifier consists of two monoblock class-A amplifier modules with separate supplies for the absolute best in separation and imaging. Generously rated, they are enough to drive even the most demanding loudspeakers with ease. Low distortion and very quiet they will deliver all music types exactly as the artist originally intended.

The resultant performance achieved by this unit is among the best in the world. It has excellent signal to noise ratio, low distortion, wide bandwidth and dynamic range, with extraordinary resolution and fine detail.

CLEANING

Before cleaning the unit, switch off power at the mains switch and remove the mains plug from the wall socket.

Clean the cabinet and remote control unit using a moist cloth. Using solvents, white spirit or thinners is not advised, as they could damage the surface finish.

INSTALLATION

Position the AMS35i on a stable, horizontal surface where there is no risk of it being knocked, or subjected to vibration such as from loudspeakers.

Important note:

As a “CLASS A” amplifier, the unit dissipates a quantity of power at all times, and it is important that it is adequately ventilated. The top and bottom are perforated to allow the smooth flow of heat through the unit. It is therefore not recommended that the unit is enclosed in a cabinet or placed where the ventilation holes are impeded as this could result in the unit cutting out due to excessive heat build-up.

The AMS35i must be protected from humidity - if the unit is moved from a cold place to a warm room, leave the unit for an hour or so to allow sufficient time for the moisture to evaporate.

Issue 2

INSTALLATION

POWER CONNECTIONS

The AMS35i is supplied with a standard IEC mains cable which plugs into the IEC socket at the back of the unit (see P.7)

AUDIO CONNECTIONS

RCA Inputs: Connect all RCA single-ended sources to relevant analogue inputs (see p.7 For more information). Use good quality fully connected (signal and ground) coaxial phono cables for all RCA signal connections.

XLR Inputs: Connect all XLR balanced sources to relevant analogue inputs (see p.7 For more information). Use good quality fully connected (signals and ground) balanced XLR cables for all XLR signal connections.

Outputs: Connect loudspeakers to the terminals on the back panel marked as LEFT and RIGHT SPEAKER outputs

The TAPE output allows loop through of analogue signals for example, to pass on to recorder or monitor. It is also the ideal output to connect our headphone amps into.

The PRE-OUToutput allows analogue signals controlled by the volume, to pass on to a second amplifier. This is useful for bi-amping.

Page 6 of 12

AMS35I specifications

The Musical Fidelity AMS35I is a high-performance integrated amplifier that exemplifies the brand's commitment to delivering exceptional audio quality and innovation. With its sleek design and robust build quality, the AMS35I stands as a testament to Musical Fidelity's craftsmanship and technological prowess in high-fidelity sound reproduction.

One of the most notable features of the AMS35I is its powerful amplification capabilities. Rated at 35 watts per channel into 8 ohms, the amplifier can deliver 70 watts per channel into a 4-ohm load, allowing it to drive a wide range of speakers with ease. This power output ensures that listeners can enjoy dynamic and rich sound across various genres of music, from the delicate nuances of classical performances to the driving energy of rock and electronic music.

The AMS35I utilizes a dual-mono design, which is pivotal in minimizing crosstalk and ensuring optimal channel separation. This design approach enhances the overall sonic clarity and stage depth, allowing listeners to experience a more immersive and detailed soundstage. Additionally, the amplifier features a Class A/B output stage that combines the benefits of both Class A and Class B amplification, resulting in high-efficiency operation without compromising on sound quality.

In terms of connectivity, the AMS35I boasts a versatile array of inputs, including multiple line-level inputs, a dedicated phono input for turntables, and balanced XLR connectivity for high-quality signal transmission. This flexibility enables audiophiles to connect various audio sources seamlessly, accommodating different playback environments with ease.

Another standout feature of the AMS35I is its advanced DAC (digital-to-analog converter) capabilities. With high-resolution input options available, the amplifier can effortlessly handle a broad range of digital audio formats, providing superior audio conversion and playback quality from streaming services and digital files. This technology ensures that users can enjoy music with exceptional fidelity and minimal distortion.

Moreover, the AMS35I is equipped with a high-precision volume control system, resulting in smooth and accurate adjustments to the listening level. The build quality is equally impressive, with a solid chassis designed to minimize vibration and interference, further enhancing the listening experience.

In summary, the Musical Fidelity AMS35I is an integrated amplifier that marries power, precision, and versatility. With its advanced technologies, high-quality components, and exceptional sound performance, it is a worthy investment for audiophiles seeking to elevate their listening experience to new heights.