Walker 74-inch Fastener Loctite Application & Torque Instructions, Dghs & DSD Deck Assemblies

FASTENER LOCTITE® APPLICATION & TORQUE INSTRUCTIONS

ITEM	DESCRIPTION	ITEM	DESCRIPTION
NO.		NO.

Heavy Duty Gear Drive Assemblies DSD, DGHS, DML42A Item # 1 applies to all Heavy Duty deck models EXCEPT DSD52 and DSD62.

1Apply Loctite® Threadlocker # 277 (Red) to Item # 1 used on Heavy Duty Gearbox Connector Tubes. Torque to 115 in-lb (34.7 N·m).

DGHS & DSD Deck Assemblies

Items # 2 & 3 apply to all deck models EXCEPT DSD52 and

DSD62.

2Apply Loctite® Threadlocker # 242 (Blue) to P/N F211 (1/4-20 x 7/8 Hex Bolt, used on Gearbox Connector Tubes) prior to assembly. Torque to 90 in-lb (10.2 N·m).

3Torque P/N F018 (5/8-18 Hex Nut, used on underside of blades) to 60 ft-lb (81.4 N·m). DO NOT apply Loctite®.

DSD52 & DSD62 Deck Assemblies

4Apply Loctite® Threadlocker # 242 (Blue) to P/N F114 (5/16-18 x 5/8 SQH Set Screw, used on Drive Pulley) prior to assembly. Torque to 190 in-lb (21.5 N·m).

5Apply Loctite® Threadlocker # 242 (Blue) to P/N F076 (3/8-16 x 5/8 SQH Set Screw, used on U-Joint Shaft Assy, T-Scope) prior to assembly. Torque to 400 in-lb (45.2 N·m).

6Torque P/N F339 (5/16-18 x 3/4 Self-Tapping Bolt, used on Mount Braket & PTO Guard) to 200 in-lb (22.6 N·m). DO NOT apply Loctite®.

7Apply Loctite® Threadlocker # 242 (Blue) to P/N F226 (5/16-18 x 7/8 Hex Bolt, used on Right Angle Gearbox) prior to assembly. Torque to 18 ft-lb (24.4 N·m).

NOTE: Models DGHS48 and DSD52 are shown here. Refer to individual deck assemblies for exact locations and quanti- ties of items listed above.

Use only genuine Walker® replacement parts. Effective Date 07-01-06

50